ET-108 Network Card Settings and Configuration
DANPEX CORPORATION
ET-108
Card Type | Transceiver |
NIC Type | Ethernet |
Data Bus | AUI via DB-15 port |
Network Transfer Rate | 10Mbps |
Topology | Star |
Wiring Type | Fiber optic cable |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI via DB-15 port | CN1 | Fiber optic ST connector for transmit line | CN3 |
Fiber optic ST connector for receive line | CN2 | ||
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | SQE test disabled | JP1 | Pins 1 & 2 closed |
SQE test enabled | JP1 | Pins 2 & 3 closed | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PWR | Unidentified | On | Power is on |
PWR | Unidentified | Off | Power is off |
LNK | Unidentified | On | Network connection is good |
LNK | Unidentified | Off | Network connection is broken |
RX | Unidentified | Blinking | Transceiver is receiving from network |
RX | Unidentified | Off | Transceiver is not receiving from network |
TX | Unidentified | Blinking | Transceiver is transmitting to network |
TX | Unidentified | Off | Transceiver is not transmitting to network |
My Books
