ET-103 Network Card Settings and Configuration

Card Type	Transceiver
NIC Type	Ethernet
Data Bus	AUI via DB-15 port
Network Transfer Rate	10Mbps
Topology	Linear Bus
Wiring Type	Thick coaxial via tap connector

CONNECTIONS
Function	Label	Function	Label
AUI via DB-15 port	CN1	Tap connector for thick coaxial cable	CN2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	SQE test disabled	JP1	Pins 1 & 2 closed
	SQE test enabled	JP1	Pins 2 & 3 closed
»	Transmit lines not terminated	JP2	Pins 1 & 2 closed
	Transmit lines terminated with 78 ohms	JP2	Pins 2 & 3 closed

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Unidentified	On	Power is on
PWR	Unidentified	Off	Power is off
TX	Unidentified	Blinking	Transceiver is transmitting to network
TX	Unidentified	Off	Transceiver is not transmitting to network
RX	Unidentified	Blinking	Transceiver is receiving from network
RX	Unidentified	Off	Transceiver is not receiving from network
CD	Unidentified	Blinking	Collision has been detected
CD	Unidentified	Off	Collision has not been detected
SQE	Unidentified	On	SQE test is enabled
SQE	Unidentified	Off	SQE test is disabled