ENET16/P Network Card Settings and Configuration
COMPEX, INC.
ENET16/P
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 16-bit ISA |
Topology | Linear bus |
Wiring Type | RG-58A/U 50ohm coaxial AUI transceiver via DB-15 port |
Boot ROM | Available |
SEGMENT LENGTH | ||
Maximum Length | J1 | |
| » | 185 meters | Closed |
300 meters | Open | |
Note:Segment length is the total length of cable between the two farthest cards on the segment. Each card on the segment must have this option set the same. | ||
NETWORK VERSION | ||
Version | J2 | |
| » | Ethernet version 2 | Open |
Ethernet version 1 | Closed | |
INTERRUPT REQUEST | ||
IRQ | J4A | J4B |
4 | Closed | Open |
| 5 | Closed | Closed |
7 | Open | Closed |
I/O BASE ADDRESS | ||||
Address | J5A | J5B | J5C | J5D |
200h | Closed | Closed | Closed | Closed |
240h | Closed | Closed | Open | Closed |
280h | Closed | Open | Closed | Closed |
2C0h | Closed | Open | Open | Closed |
300h | Open | Closed | Closed | Closed |
340h | Open | Closed | Open | Closed |
380h | Open | Open | Closed | Closed |
3C0h | Open | Open | Open | Closed |
DIAGNOSTIC LED(S) | ||
LED | Status | Condition |
LJ1 | On | Data is being transmitted or received |
LJ1 | Off | Data is not being transmitted or received |
My Books
