ENET16-MC/P Network Card Settings and Configuration
COMPEX, INC.
ENET16-MC/P
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | MCA |
Topology | Linear bus/Star |
Wiring Type | Shielded/Unshielded Twisted Pair RG-58A/U 50ohm coaxial AUI transceiver via 16-pin connector |
Boot ROM | Available |
SEGMENT LENGTH | ||
Maximum Length | J1 | |
| » | 185 meters | Closed |
300 meters | Open | |
Note:Segment length is the total length of cable between the two farthest cards on the segment. Each card on the segment must have this option set the same. | ||
NETWORK VERSION | ||
Version | J2 | |
| » | Ethernet version 2 | Open |
Ethernet version 1 | Closed | |
LINK INTEGRITY TEST | ||
Setting | J3 | |
| » | Enabled | Pins 1 & 2 closed |
Disabled | Pins 2 & 3 closed | |
SOFTWARE DRIVER | |||
Driver | J4A | j4B | |
| » | COMPEX | Closed | Closed |
SMC or WD | Closed | Open | |
Novell | Open | Closed | |
Software selectable | Open | Open | |
CONNECTIONS | |
Connector | Purpose |
J5 | Factory diagnostic port |
AUI | 16-pin header to DB-15 connector |
My Books
