928A Network Card Settings and Configuration

Device Type	Transceiver
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Not available
Network Transfer Rate	10Mbps
Topology	Star
Wiring Type	Unshielded twisted pair
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15	CN1	RJ-45 UTP connector	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	SQE test function disabled	JP1	Pins 1 & 2 closed
	SQE test function enabled	JP1	Pins 2 & 3 closed
»	Link integrity test feature disabled	JP2	Pins 2 & 3 closed
	Link integrity test feature enabled	JP2	Pins 1 & 2 closed
Note: JP2 is located internally.

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Green	On	Power is on
PWR	Green	Off	Power is off
LNK	Green	On	Network connection is good
LNK	Green	Off	Network connection is broken
COL	Red	On	Collision detected on network
COL	Red	Off	No collision detected on network
TX	Amber	On	Data is being transmitted
TX	Amber	Off	Data is not being transmitted
RX	Amber	On	Data is being received
RX	Amber	Off	Data is not being received
Note: LNK LED remains on when the SQE test function is disabled.