518 Network Card Settings and Configuration
BAY NETWORKS, INC.
518
Device Type | Apple Ethernet Transceiver |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Not available |
Network Transfer Rate | 10Mbps |
Topology | Star |
Wiring Type | Unshielded twisted pair |
Data Bus | External |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI transceiver via DB-15 | CN1 | RJ-45 UTP connector | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | SQE test function enabled | SW1/1 | On |
SQE test function disabled | SW1/1 | Off | |
| » | Factory configured - do not alter | SW1/2 | Unidentified |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PWR | Green | On | Power is on |
PWR | Green | Off | Power is off |
LNK | Green | Blinking | Network connection is good |
LNK | Green | Off | Network connection is broken |
INV | Yellow | On | UTP signal inversion has been detected and corrected |
INV | Yellow | Off | UTP signal inversion has not been detected |
TX | Green | On | Data is being transmitted |
TX | Green | Off | Data is not being transmitted |
RX | Green | On | Data is being received |
RX | Green | Off | Data is not being received |
COL | Yellow | On | Collision detected on network |
COL | Yellow | Off | No collision detected on network |
My Books
