POWERMATE 1 (APC-H200E, APC-H201E, APC-H202E, APC-H203E) Motherboard Settings and Configuration
NEC TECHNOLOGIES, INC.
POWERMATE 1 (APC-H200E, APC-H201E, APC-H202E, APC-H203E)
Processor | 80286 |
Processor Speed | 10MHz |
Chip Set | Intel |
Max. Onboard DRAM | 640MB |
SRAM Cache | None |
BIOS | Phoenix |
Dimensions | 330mm x 218mm |
I/O Options | Floppy drive interface, parallel port, serial port |
NPU Options | 80287 |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Serial port | C1 | External battery | P3 |
Parallel port | C2 | Power LED & keylock | P7 |
Speaker | P1 | Floppy drive interface | P9 |
USER CONFIGURABLE SETTINGS | |||
Function | Jumper/Switch | Position | |
| » | Factory configured - do not alter | 5K1 | pins 1 & 2 closed |
| » | RAS/ALE output select normal | 11M2 | pins 2 & 3 closed |
RAS/ALE output select early | 11M2 | pins 1 & 2 closed | |
| » | Not used | 16C1/1 | Off |
| » | Parallel port enabled | 16C1/2 | On |
Parallel port disabled | 16C1/2 | Off | |
| » | Not used | 16C1/5 | On |
| » | Floppy interface (P9) enabled | 16C1/6 | On |
Floppy interface (P9) disabled | 16C1/6 | Off | |
| » | Floppy address select primary | 16C1/7 | Off |
Floppy address select secondary | 16C1/7 | On | |
| » | Monitor type select color | 16C1/8 | On |
Monitor type select monochrome | 16C1/8 | Off | |
| » | Factory configured - do not alter | 16B2/1 | On |
| » | Factory configured - do not alter | 16B2/2 | Off |
| » | Factory configured - do not alter | 16B2/3 | On |
| » | Not used | 16B2/4 | On |
| » | Factory configured - do not alter | 16B2/6 | On |
| » | Floppy drive ROM select normal | 20H2 | pins 1 & 2 closed |
Floppy drive ROM select special | 20H2 | pins 2 & 3 closed | |
Note:Jumper 5K1 is not present on later revisions of the board. | |||
TEST MODE CONFIGURATION | |||
Mode | 16B2/5 | 15A1 | |
| » | Normal operation | On | Out |
Test mode enabled | Off | In | |
SERIAL PORT CONFIGURATION | |||||
Port Assignment | Address | Interrupt | 16C1/3 | 16C1/4 | |
| » | COM1 | 3F8-3FFh | IRQ4 | On | Off |
COM2 | 2F8-2FFh | IRQ3 | Off | On | |
Disabled | N/A | N/A | Off | Off | |
DRAM CONFIGURATION | ||||
Size | Bank 0 | Bank 1 | 6K1/pins 1 & 4 | 6K1/pins 2 & 3 |
512KB | 512K | 0K | Open | Closed |
640KB | 512K | 128K | Closed | Open |
MEMORY WAIT STATE CONFIGURATION | ||
Wait state | 5K3/pins 1 & 2 | 5K3/pins 3 & 4 |
2 wait states | Closed | Open |
1 wait state | Open | Closed |
Note:Memory wait states are only applied to external memory card(s). When not in turbo mode the memory wait state is always 1 wait state. | ||
BIOS CONFIGURATION | |||
Type | Size | 12J1 | 12J2 |
EPROM | 27256 | pins 2 & 3 closed | pins 2 & 3 closed |
EPROM | 27128 | pins 1 & 2 closed | pins 2 & 3 closed |
ROM | 27256 | pins 1 & 2 closed | pins 1 & 2 closed |
ROM | 27128 | pins 1 & 2 closed | pins 1 & 2 closed |
My Books
