KLH
MODEL 215
Processor | 80386SX |
Processor Speed | 16/20MHz |
Chip Set | C & T |
Maximum Onboard Memory | 8MB |
Cache | None |
BIOS | Phoenix |
Dimensions | 330mm x 218mm |
I/O Options | Floppy drive interface, IDE interface, parallel port, PS/2 mouse port, serial port, VGA port, riser slot |
NPU Options | 80387SX |
CONNECTIONS | |||
Function | Label | Function | Label |
VGA port | CN1 | Floppy drive interface | CN5 |
Parallel port | CN2 | IDE interface | CN6 |
Serial port | CN3 | Riser slot | SL1 |
PS/2 mouse port | CN4 | ||
Note: CN6 is located on the riser card. |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
Oscillator select alternate oscillator | J3 | Pins 1 & 2 closed | |
Oscillator select standard oscillator | J3 | Pins 2 & 3 closed | |
Hard drive circuitry disabled | JP1 | Pins 1 & 2 closed | |
Hard drive circuitry enabled | JP1 | Pins 2 & 3 closed | |
» | Mouse enabled | SW1/3 | On |
Mouse disabled | SW1/3 | Off | |
» | Serial port enabled | SW1/5 | On |
Serial port disabled | SW1/5 | Off | |
» | Parallel port enabled | SW1/6 | On |
Parallel port disabled | SW1/6 | Off | |
» | Floppy drive interface enabled | SW1/7 | On |
Floppy drive interface disabled | SW1/7 | Off | |
Note: JP1 is located on the riser card. |
DRAM | ||
Size | Bank 0 | Bank 1 |
1MB | (4) 256K x 9 | None |
2MB | (4) 256K x 9 | (4) 256K x 9 |
4MB | (4) 1M x 9 | None |
5MB | (4) 256K x 9 | (4) 1M x 9 |
8MB | (4) 1M x 9 | (4) 1M x 9 |
Note: The orientation of the banks is unidentified. |
MONITOR | |||
Setting | SW1/1 | SW1/8 | |
» | Monochrome | On | Off |
Color | Off | On |
ON BOARD VIDEO | |||
Setting | SW1/2 | SW1/4 | |
» | Enabled | On | On |
Disabled | Off | Off |
IRQ | ||
Setting | JP4 | |
IRQ3 | Pins 3 & 4 closed | |
IRQ4 | Pins 5 & 6 closed | |
IRQ5 | Pins 7 & 8 closed | |
» | IRQ9 | Pins 1 & 2 closed |
MISCELLANEOUS TECHNICAL NOTE |
The location of pin 1 on all jumpers and pin 1 on SW1 is unidentified. |