ERGOPRO D5/60 Motherboard Settings and Configuration

Processor	Pentium
Processor Speed	60/66MHz
Chip Set	OPTI
Max. Onboard DRAM	128MB
Cache	256KB
BIOS	ICL
Dimensions	330mm x 218mm
I/O Options	PS/2 mouse port, parallel port, serial ports (2), VGA port, VGA feature connector, floppy drive interface, IDE interface, riser slots (2)
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
VGA port	CN1	Floppy drive interface	CN8
Parallel port	CN2	IDE interface LED	J1
Serial port 2	CN3	Chassis fan power	J2
Serial port 1	CN4	Front panel connector	J3
PS/2 mouse port	CN5	Chassis fan power	J4
VGA feature connector	CN6	Riser Card	SL1 & SL2
IDE interface	CN7

USER CONFIGURABLE SETTINGS
Function		Jumper	Position
»	On board VGA enabled	JP1	pins 1 & 2 open
	On board VGA disabled	JP1	pins 1 & 2 closed
»	CMOS memory normal operation	JP1	pins 3 & 4 closed
	CMOS memory clear	JP1	pins 5 & 6 closed
»	System lock disabled	JP1	pins 11 & 12 closed
	System lock enabled	JP1	pins 9 & 10 closed
»	Boot block BL RE normal operation	JP1	pins 13 & 14 open
	Boot block BL RE reload enabled	JP1	pins 13 & 14 closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	NONE
16MB	(2) 1M x 36	(2) 1M x 36
16MB	(2) 2M x 36	NONE
24MB	(2) 2M x 36	(2) 1M x 36
32MB	(2) 2M x 36	(2) 2M x 36
32MB	(2) 4M x 36	NONE
40MB	(2) 1M x 36	(2) 4M x 36
48MB	(2) 4M x 36	(2) 2M x 36
64MB	(2) 4M x 36	(2) 4M x 36
64MB	(2) 8M x 36	NONE
72MB	(2) 1M x 36	(2) 8M x 36
80MB	(2) 2M x 36	(2) 8M x 36
96MB	(2) 8M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36

CACHE CONFIGURATION
Size	Bank 0
256KB	(8) 32K x 8
Note:Cache is factory installed and is not configurable.

CPU SPEED CONFIGURATION
Speed	JP1
60MHz	pins 7 & 8 open
66MHz	pins 7 & 8 closed

VRAM CONFIGURATION
Size	Bank 0	Bank 1
1MB	(2) 256K X 16	NONE
2MB	(2) 256K X 16	(2) 256K X 16
Note:Bank 0 is factory installed and is not configurable.