ERGOPRO D5/60 REV. 1 Motherboard Settings and Configuration

Processor	Pentium
Processor Speed	60MHz
Chip Set	OPTI
Max. Onboard DRAM	128MB
Cache	512KB
BIOS	ICL
Dimensions	432mm x 368mm
I/O Options	PS/2 mouse port, parallel port, serial ports (2), VGA port, VGA feature connector, floppy drive interfaces (2), SCSI interface (2), microphone port, headphone port, CD ROM audio port
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
Microphone port	CN1	Floppy drive interface	CN12
Headphone port	CN2	CR ROM audio connector	J1
VGA feature connector	CN3	IDE interface LED	J2
VGA port	CN4	Chassis fan power	J4
PS/2 mouse port	CN5	Chassis fan power	J7
SCSI port	CN6	Front panel connector	J8
Parallel port	CN7	Configuration lock	J9
Serial port	CN8	Reset switch	J10
SCSI connector	CN10	Speaker	J11
Floppy drive interface	CN11	Riser Card	SL1

USER CONFIGURABLE SETTINGS
Function		Jumper	Position
»	Factory configured - do not alter	CN9	N/A
»	On board VGA enabled	J3	Open
	On board VGA disabled	J3	Closed
»	CMOS memory normal operation	J5	pins 1 & 2 closed
	CMOS memory clear	J5	pins 2 & 3 closed
»	Boot block disabled	J6	Open
	Boot block enabled	J6	Closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	NONE
16MB	(2) 1M x 36	(2) 1M x 36
16MB	(2) 2M x 36	NONE
24MB	(2) 1M x 36	(2) 2M x 36
32MB	(2) 2M x 36	(2) 2M x 36
32MB	(2) 4M x 36	NONE
40MB	(2) 1M x 36	(2) 4M x 36
48MB	(2) 2M x 36	(2) 4M x 36
64MB	(2) 4M x 36	(2) 4M x 36
64MB	(2) 8M x 36	NONE
72MB	(2) 1M x 36	(2) 8M x 36
80MB	(2) 2M x 36	(2) 8M x 36
96MB	(2) 4M x 36	(2) 8M x 36
128MB	(2) 8M x 36	(2) 8M x 36

CACHE CONFIGURATION
Size	Bank 0
512KB	(16) 32K x 8
Note: Cache is factory installed and is not configurable.

VRAM CONFIGURATION
Size	Bank 0	Bank 1
1MB	(2) 256K x 16	NONE
2MB	(2) 256K x 16	(2) 256K x 16