SUPER 286C (REV. A & B) Motherboard Settings and Configuration

HYUNDAI ELECTRONICS, INC.

SUPER 286C (REV. A & B)

Processor	80286
Processor Speed	10MHz
Chip Set	VLSI
Max. Onboard DRAM	1MB
Cache	None
BIOS	Award
Dimensions	355mm x 304mm
I/O Options	Serial ports (2), parallel port, floppy drive interface
NPU Options	80287

USER CONFIGURABLE SETTINGS
Function		Jumper/Switch	Position
»	CPU speed select 10MHz	SW1/3	Off
	CPU speed select 8MHz	SW1/3	On
»	Monitor type select color	SW1/4	Off
	Monitor type select monochrome	SW1/4	On
»	Factory configured - do not alter	SW2	pins 1 & 2 closed
»	CS ROM	SW3	pins 1 & 2 closed
	XMEMR	SW3	pins 2 & 3 closed
»	BIOS type select 27256	SW4	pins 2 & 3 closed
	BIOS type select 27128	SW4	pins 1 & 2 closed
»	Floppy drive mode select single speed	SW5	pins 1 & 2 closed
	Floppy drive mode select dual speed	SW5	pins 2 & 3 closed
»	COM1 enabled (IRQ4)	SW6 & SW9	Closed
	COM1 disabled	SW6 & SW9	Open
»	COM2 enabled (IRQ3)	SW7 & SW8	Closed
	COM2 disabled	SW7 & SW8	Open
	Notes: The locations of SW2 & SW3 are unidentified. To install an internal modem as either COM1 or COM2, the PAL chip at U65 must be replaced with a SER1 U58EC chip. Hyundai no longer stocks this chip and there is no third party sources known. The location of U65 is unidentified.