COMPAQ COMPUTER CORPORATION
PROLIANT 5000R
Processor | Pentium Pro |
Processor Speed | 166/200MHz |
Chip Set | Unidentified |
Video Chip Set | Unidentified |
Maximum Onboard Memory | 4GB |
Maximum Video Memory | Unidentified |
Cache | 256/512KB (located on Pentium Pro CPU) |
BIOS | Unidentified |
Dimensions | Unidentified |
I/O Options | Fast SCSI-2 interface, parallel port, PS/2 mouse port, serial ports (2), RJ-45 connector, VGA port |
NPU Options | None |
COMPAQ-COMPUTER-CORPORATION-Pentium-Pro-PROLIANT-5-1
CONNECTIONS |
Note: The location of the connectors is unidentified. |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | On board video enabled | S1/1 | Off |
On board video disabled | S1/1 | On | |
» | Chassis configuration lock enabled | S1/2 | Off |
Chassis configuration lock disabled | S1/2 | On | |
» | System installed in a tower chassis | S1/3 | Off |
System installed in a rack chassis | S1/3 | On | |
» | System boot from floppy controlled through configuration settings | S1/4 | Off |
System boot from floppy drive regardless of configuration settings | S1/4 | On | |
» | Password enabled | S1/5 | Off |
Password disabled | S1/5 | On | |
» | CMOS memory normal operation | S1/6 | Off |
CMOS memory clear | S1/6 | On | |
DIMM CONFIGURATION |
Note: The configuration of the 4GB memory is unidentified. |
CACHE CONFIGURATION |
Note: 256KB/512KB cache is located on the Pentium Pro CPU. |
VIDEO MEMORY CONFIGURATION |
Note: The size of the video memory is unidentified. |
DRIVE SELECTION | |||
SCSI ID | ID0 | ID1 | ID2 |
5 | On | Off | On |
6 | Off | On | On |
MONITOR SELECTION NOTE |
Note: The Proliant 5000R is capable of controlling up to 8 servers, each with their own monitor. To select a monitor type for a specific server, first consult either the 4 or 8 Port Monitor Control Selection Table to determine which switches are used for the configuration.. Then refer to the Server Monitor Selection table to determine the individual switch settings. |
4 PORT MONITOR CONTROL SELECTION | ||
Switch | Controlling switches | Server controlled |
S1 | SW1/1 - 4 | 1 |
S1 | SW1/5 - 8 | 2 |
S2 | SW2/1 - 4 | 3 |
S2 | SW2/5 - 8 | 4 |
8 PORT MONITOR CONTROL SELECTION | ||
Switch | Controlling switches | Server controlled |
S1 | SW1/1 - 4 | 1 |
S1 | SW1/5 - 8 | 2 |
S2 | SW2/1 - 4 | 3 |
S2 | SW2/5 - 8 | 4 |
S3 | SW3/1 - 4 | 5 |
S3 | SW3/5 - 8 | 6 |
S4 | SW3/1 - 4 | 7 |
S4 | SW3/5 - 8 | 8 |
SERVER MONITOR SELECTION | ||||
Type | SW1/1 orSW1/5 | SW1/2 orSW1/6 | SW1/3 orSW1/7 | SW1/4 orSW1/8 |
VGA | Off | Off | On | Off |
Monochrome | Off | Off | On | Off |
VGA | Off | On | Off | Off |
SVGA | Off | On | Off | Off |
SVGA- Compaq 430 | On | On | Off | On |
XVGA – IBM8512 | Off | On | Off | Off |
XVGA – IBM8513 | Off | On | Off | Off |
XVGA – IBM8514 | On | On | Off | Off |
XVGA – IBM8515 | On | Off | Off | Off |
Note: Each bank of switches must reflect the type of monitor configured on the server. | ||||
MISCELLANEOUS TECHNICAL NOTE |
Note: Diagram not available. |