AM-137 Motherboard Settings and Configuration

Processor	Motorola 68030
Processor Speed	Unidentified
Chip Set	Unidentified
Video Chip Set	None
Maximum Onboard Memory	32MB
Maximum Video Memory	None
Cache	None
BIOS	Unidentified
Dimensions	330mm x 218mm
I/O Options	Floppy drive interface, IDE interface, SCSI interface, parallel port, serial ports (8), I/O expansion slot
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
IDE interface	CN1	Front panel connector	J10
SCSI interface	CN2	Reset switch	W3
Serial ports 0 – 3	CN3	Power LED	W8
Serial ports 4 – 7	CN4	Run LED	W9
Floppy drive interface (AM-219)	CN5	Disk LED	W12
Parallel port	J1	I/O expansion slot	SL1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	JP3	Closed
»	Factory configured - do not alter	JP4	Closed
»	Remote reset disabled	W2	Open
	Remote reset enabled	W2	Closed
»	Factory configured - do not alter	W4	Closed
»	Factory configured - do not alter	W5	Closed
»	Factory configured - do not alter	W8	Open
»	Factory configured - do not alter	W9	Open
»	Factory configured - do not alter	W12	Open
»	Factory configured - do not alter	W13	Open
»	Factory configured - do not alter	W14	Open

DRAM CONFIGURATION
Size	Bank 0
4MB	(1) 1M x 36
8MB	(1) 2M x 36
16MB	(1) 4M x 36
32MB	(1) 8M x 36

DRAM JUMPER CONFIGURATION
Size	JP1	JP2
4MB	Closed	Closed
8MB	Open	Closed
16MB	Closed	Open
32MB	Open	Open

TERMINATION SELECTION
Setting	W6
Termination enabled	Pins 2 & 3 closed
Termination disabled	Pins 1 & 2 closed

MAIN BOOT SELECTION
Setting		SW1/1	SW1/2
	Floppy drive	On	On
»	SCSI	Off	On

ALTERNATE BOOT SELECTION
Setting	SW1/3	SW1/4
None	On	On
Floppy drive	Off	On
Steaming tape	Off	Off