WISECOM, INC.
WS-3314ES3
Card Type | Modem (synchronous/asynchronous) |
Chipset | Rockwell |
I/O Options | Voice, microphone in, speaker out |
Maximum Data Rate | 33.6Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | External |
Fax Class | Class I |
Data Modulation | Bell 103A/212A ITU-T V.22, V.22bis, V.23, V.32, V.32bis, V.34 |
Fax Modulation | ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
CONNECTIONS | |||
Function | Label | Function | Label |
Line in | CN1 | DC power in | CN4 |
Line out | CN2 | Microphone in | CN5 |
RS-232/422 | CN3 | Speaker out | CN6 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
MR | Red | On | Power is on |
MR | Red | Off | Power is off |
TR | Red | On | DTR signal is high |
TR | Red | Off | DTR signal is low |
SD | Red | On | Modem is transmitting data |
SD | Red | Off | Modem is not transmitting data |
RD | Red | On | Modem is receiving data |
RD | Red | Off | Modem is not receiving data |
OH | Red | On | Modem is off-hook |
OH | Red | Off | Modem is on-hook |
CD | Red | On | Carrier signal detected |
CD | Red | Off | Carrier signal not detected |
DIAGNOSTIC LED(S) (CON’T) | |||
LED | Color | Status | Condition |
RS | Red | On | RTS signal is high |
RS | Red | Off | RTS signal is low |
CS | Red | On | CTS signal is high |
CS | Red | Off | CTS signal is low |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z |
Extended AT Commands |
\A, \B, \K, \N |
%C, %E, %L, %Q |
Special AT Commands |
+MS |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24, S25 |
S26, S27, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41, S46, S48, S82, S86, S91, S92, S95 |
Note: See MHI documentation for complete information. |
UNIDENTIFIED COMMANDS | |
Command | Default |
S37 | 0 |
Proprietary AT Command Set
DISPLAY INFORMATION | |
Type: | Immediate |
Format: | AT [cmds] In [cmds] |
Description: | Displays information requested about the modem. |
Command | Function |
I0 | Reports product identification code. |
I1 | Reports ROM checksum. |
I2 | Tests and reports ROM checksum. |
I3 | Reports firmware revision and model ID. |
I6 | Reports data pump ID. |