WISECOM, INC.
WS-2814JS6 (EXTERNAL)
Card Type | Modem (synchronous/asynchronous) |
Chipset | Sierra |
I/O Options | Voice |
Maximum Data Rate | 28.8Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | External |
Fax Class | Class I & II |
Data Modulation | Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 |
Fax Modulation | ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
CONNECTIONS | |||
Function | Label | Function | Label |
Line in | CN1 | RS-232/422 | CN3 |
Line out | CN2 | DC power in | CN4 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
MR | Red | On | Power is on |
MR | Red | Off | Power is off |
TR | Red | On | DTR signal is high |
TR | Red | Off | DTR signal is low |
SD | Red | On | Modem is transmitting data |
SD | Red | Off | Modem is not transmitting data |
RD | Red | On | Modem is receiving data |
RD | Red | Off | Modem is not receiving data |
OH | Red | On | Modem is off-hook |
OH | Red | Off | Modem is on-hook |
CD | Red | On | Carrier signal detected |
CD | Red | Off | Carrier signal not detected |
DIAGNOSTIC LED(S) (CON’T) | |||
LED | Color | Status | Condition |
AA | Red | On | Auto-answer enabled |
AA | Red | Off | Auto-answer disabled |
EC | Red | On | Error correction enabled |
EC | Red | Off | Error correction disabled |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, B, D, E, H, L, M, O, P, Q, T, V, X, Y, Z |
&C, &D, &F, &M, &R, &S, &T, &V, &W, &X, &Y, &Z |
Extended AT Commands |
\C, \G, \N, \Q, \V, \X |
%A, %C, %D, %Q |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S18, S25, S26, S38 |
Note: See MHI documentation for complete information. |
Proprietary AT Command Set
See WISECOM, INC. WS-2814JS6 (INTERNAL) for a full command summary.