WILDCARD TECHNOLOGIES, INC.
SATISFAXTION MOBILE PDMCIA9025COMBO
Card Type | Modem (asynchronous), Token Ring |
Chipset | Texas Instruments TMS380C25 |
Maximum Onboard Memory | 160KB DRAM/128KB PROM |
Network Transfer Rate | 4/16Mbps |
Maximum Data Rate | 14.4Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | PCMCIA Type II |
Fax Class | Class I & II |
Data Modulation | Bell 103A/212A ITU-T V.21, V.22, V.23, V.22bis, V.32, V.32bis |
Fax Modulation | Unidentified |
Error Correction/Compression | MNP5, MNP10, V.42, V.42bis |
Topology | Token Ring |
Wire Type | Shielded/Unshielded twisted pair |
Boot ROM | Not available |
WILDCARD-TECHNOLOGIES-INC-Modem-asynchronous-Token
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, A/ |
A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z |
Extended AT Commands |
\A, \B, \G, \J, \K, \L, \N, \W |
%C, %L, %Q |
Special AT Commands |
-K, -Q, *H, )M, @M, :E, +MS |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, S16, S18, S21, S22, S23, S24, S25, S27, |
S28, S29, S30, S31, S32, S33, S36, S37, S38, S39, S40, S41, S46, S48, S82, S86, S91, S92, S95, |
S99, S201 |
Proprietary AT Command Set
CALLBACK NUMBER | |
Type: | Configuration |
Format: | AT [cmds] *Pn:xxxx: <#> |
Description: | Sets callback number at location n with the password xxxx. |
COMMAND SET | ||
Type: | Immediate | |
Format: | AT [cmds] S80=n [cmds] | |
Description: | Selects the active command set. | |
Command | Function | |
S80=0 | Switch to AT command set. | |
S80=33 | Switch to V.25bis command set. |
DISPLAY CALLBACK NUMBERS | |
Type: | Immediate |
Format: | AT [cmds] *L [cmds] |
Description: | Displays the list of all callback numbers. |
END REMOTE CONFIGURATION | |
Type: | Immediate |
Format: | AT [cmds] *E [cmds] |
Description: | Ends the remote configuration session currently in progress. |
PROTOCOL/SPEED | |
Type: | Configuration |
Format: | AT [cmds] Fn [cmds] |
Description: | Selects the protocol and speed the modem will attempt to connect at. |
Command | Function |
F0 | Auto-detect the highest common connect speed. |
F1 | Select V.21 or Bell 103 at 300bps speed. |
F3 | Select V.23 at 75/1200bps speed. |
F4 | Select V.22 or Bell 212A at 1200bps speed. |
F5 | Select V.22bis at 2400bps speed. |
F6 | Select V.32/V.32bis at 4800bps speed. |
F7 | Select V.32bis at 7200bps speed. |
F8 | Select V.32/V.32bis at 9600bps speed. |
F9 | Select V.32bis at 12Kbps speed. |
F10 | Select V.32bis at 14.4Kbps speed |
REMOTE ESCAPE CHARACTER | |
Type: | Register |
Format | AT [cmds] S202=n [cmds] |
Default: | Unidentified |
Range: | Unidentified |
Unit: | 1 ASCII character |
Description: | Selects a character to be used for escape sequences during remote configuration sessions. |
REQUEST REMOTE CONFIGURATION | |
Type: | Immediate |
Format: | AT [cmds] *R [cmds] |
Description: | Requests a remote configuration session with the remote modem. |
Proprietary V.25bis Command Set
CALL REQUESTED NUMBER WITH IDENTIFICATION | |
Type: | Immediate |
Format: | CRI<#> |
Description: | Dials the number given. If supported, the modem’s identification string will be sent with the number. |
EXECUTE AT COMMAND | |
Type: | Immediate |
Format: | CNL[AT cmds] |
Description: | Executes an AT command string. |
IDENTIFICATION STRING | |
Type: | Configuration |
Format: | AT [cmds] PRIxxxx [cmds] |
Description: | Sets the modem’s identification string to xxxx. |
See document WILDCARD TECHNOLOGIES, INC. SATISFAXTION MOBILE PDMCIA9023COMBO for a full command summary.