SPORTSTER 28,800 INTERNAL modem/telephone/ISDN Settings and Configuration
U.S. ROBOTICS, INC.
SPORTSTER 28,800 INTERNAL
Modem Type | Data (synchronous/asynchronous)/Fax |
Maximum Data Rate | 28.8Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | 8-bit ISA |
Fax Class | Class I & II.0 |
Data Modulation Protocol | Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC |
Fax Modulation Protocol | ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Line out | CN1 | Line in | CN2 |
COM PORT SETTINGS | ||||
| COM | J1/1 | J1/2 | J1/3 | J1/4 |
| COM1 | Closed | Open | Open | Open |
| » COM2 | Open | Closed | Open | Open |
| COM3 | Open | Open | Closed | Open |
| COM4 | Open | Open | Open | Closed |
INTERRUPT SELECT | |||||
Interrupt | J2/1 | J2/2 | J2/3 | J2/4 | J2/5 |
IRQ2 | Closed | Open | Open | Open | Open |
IRQ3 | Open | Closed | Open | Open | Open |
IRQ4 | Open | Open | Closed | Open | Open |
IRQ5 | Open | Open | Open | Closed | Open |
IRQ7 | Open | Open | Open | Open | Closed |
DTR SIGNAL | |
| Setting | SW1/1 |
| » DTR normal | Off |
| DTR forced high | On |
RESULT CODES | |
| Setting | SW1/2 |
| » Verbal result codes enabled | Off |
| Numeric result codes enabled | On |
RESULT CODES DISPLAY | |
| Setting | SW1/3 |
| » Enabled | On |
| Disabled | Off |
ECHO DISPLAY | |
| Setting | SW1/4 |
| » Enabled | Off |
| Disabled | On |
AUTO ANSWER | |
| Setting | SW1/5 |
| » Disabled | On |
| Enabled | Off |
CARRIER DETECT | |
| Setting | SW1/6 |
| » CD normal | Off |
| CD forced high | On |
SOFTWARE RESET | |
Setting | SW1/7 |
| » CD normal | Off |
| CD forced high | On |
AT COMMAND SET | |
Setting | SW1/8 |
Enabled | On |
Disabled | Off |
Proprietary AT Command Set
See document V1248 for a full command summary.
My Books
