MULTI-TECH SYSTEMS, INC.
MT56DSU2
Card Type | DSU/CSU (synchronous/asynchronous) |
Transfer Rates | 56Kbps/19.2Kbps/9600bps/4800bps/2400bps |
Data Bus | External |
Data Modulation Protocol | DDS |
Topology | Star/Peer-Peer |

CONNECTIONS | |||
Function | Label | Function | Label |
RS-232 port | CN1 | V.35 port | CN4 |
DC power | CN2 | Power switch | SW1 |
RJ-48 line out | CN3 | ||
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | RTS forced high | SW2/6 | Off |
RTS normal | SW2/6 | On | |
| » | DSR forced high | SW2/7 | Off |
DSR normal | SW2/7 | On | |
| » | Synchronous mode | SW2/8 | On |
Asynchronous mode | SW2/8 | Off | |
| » | Loopback test mode disabled | SW2/9 | On |
Loopback test mode enabled | SW2/9 | Off | |
| » | Test pattern mode disabled | SW2/10 | On |
Test pattern mode enabled | SW2/10 | Off | |
| » | Circuit assurance function disabled | SW2/11 | On |
Circuit assurance function enabled | SW2/11 | Off | |
| » | System status function disabled | SW2/12 | On |
System status function enabled | SW2/12 | Off | |
| » | Elastic store function disabled | SW3/3 | On |
Elastic store function enabled | SW3/3 | Off | |
| » | Anti-streaming function disabled | SW3/4 | Off |
Anti-streaming function enabled | SW3/4 | On | |
ASYNCHRONOUS MODE BIT LENGTH | |||
Setting | SW3/1 | SW3/2 | |
9-bit | On | Off | |
| » | 10-bit | Off | On |
11-bit | On | On | |
CLOCK SOURCE | |||
Setting | SW2/4 | SW2/5 | |
Internal | On | On | |
External | Off | Off | |
| » | From DDS network | Off | On |
TRANSMISSION RATE | ||||
Setting | SW2/1 | SW2/2 | SW2/3 | |
2400bps | Off | Off | Off | |
4800bps | Off | On | Off | |
9600bps | Off | Off | On | |
19.2Kbps | Off | On | On | |
| » | 56Kbps | On | On | On |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
SD | Red | On | DSU is transmitting data |
SD | Red | Off | DSU is not transmitting data |
RD | Red | On | DSU is receiving data |
RD | Red | Off | DSU is not receiving data |
CD | Red | On | Carrier signal detected |
CD | Red | Off | Carrier signal not detected |
56 | Red | On | DSU connected at 56Kbps |
56 | Red | Off | DSU not connected at 56Kbps |
19.2 | Red | On | DSU connected at 19.2Kbps |
19.2 | Red | Off | DSU not connected at 19.2Kbps |
96 | Red | On | DSU connected at 9600bps |
96 | Red | Off | DSU not connected at 9600bps |
48 | Red | On | DSU connected at 4800bps |
48 | Red | Off | DSU not connected at 4800bps |
CTS | Red | On | CTS signal is high |
CTS | Red | Off | CTS signal is low |
RTS | Red | On | RTS signal is high |
RTS | Red | Off | RTS signal is low |
NS | Red | On | DDS signal not detected |
NS | Red | Off | DDS signal detected |
NS | Red | Blinking | Errors detected in test pattern |
OOS | Red | On | DDS network out-of-service condition detected |
OOS | Red | Off | DDS network out-of-service condition not detected |
TM | Red | On | DSU is in test mode |
TM | Red | Off | DSU is not in test mode |