6520/6560 MPROUTER T1/E1 DUAL PORT CARD modem/telephone/ISDN Settings and Configuration

Card Type	T1 or E1 CSU/DSU
Chip Set	Unidentified
I/O Options	MVIP bus
Transfer Rate	1.544Mbps x 2 for T1, 2.048Mbps x 2 for E1
Data Bus	16-bit ISA

CONNECTIONS
Function	Label	Function	Label
Line 1	CN1	Diagnostic port (not used)	CN3
Line 2	CN2	MVIP bus	CN4

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	SW1/1	On
»	Factory configured - do not alter	SW1/2	On
»	Factory configured - do not alter	SW1/3	On
»	Factory configured - do not alter	SW1/4	On
»	Factory configured - do not alter	SW1/5	On
»	Factory configured - do not alter	SW1/6	Off
»	Factory configured - do not alter	SW1/7	Off
»	Factory configured - do not alter	SW1/8	Off
»	Factory configured - do not alter	SW1/9	Off
»	Factory configured - do not alter	SW1/10	On

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	On	Carrier signal not detected on line 1
LED1	Yellow	Off	Carrier signal detected on line 1
LED2	Yellow	On	Carrier signal not detected on line 2
LED2	Yellow	Off	Carrier signal detected on line 2
LED3	Green	On	Card is operating normally
LED3	Green	Off	Card has failed
LED4	Yellow	On	Card has failed
LED4	Yellow	Off	Card is operating normally

MISCELLANEOUS TECHNICAL NOTE

This card is designed for use in Motorola’s 6520/6560 MPRouter system and will not function in another system. See documents M3596 and M3597 for more information.