SOLO 56/64 DSU/CSU (REV. B) modem/telephone/ISDN Settings and Configuration

DIGITAL LINK

SOLO 56/64 DSU/CSU (REV. B)

Card Type
DSU/CSU
NIC Type
T1
Chip Set
Unidentified
I/O Options
AC power connector, DC power connector, data port via 25-pin connector
serial port (RS-232), network interface via 15-pin connector
Wiring Type
RJ-48 shielded twisted pair
Maximum Data Rate
56Kbps (64Kbps clear channel)
Data Bus
External

CONNECTIONS
Function
Label
Function
Label
AC power connector
CN1
Network port via 15-pin connector
CN4
DC power connector
CN2
Serial port
CN5
Data port via 25-pin connector
CN3
Fuse
F1

USER CONFIGURABLE SETTINGS
Setting
Label
Position
»
Data port format V.35 selected
S1/1
Off

Data port format RS-449 selected
S1/1
On
»
Factory configured - do not alter
S1/2
Off
»
Factory configured - do not alter
S1/5
Off
»
Factory configured - do not alter
S1/6
Off
»
Factory configured - do not alter
S1/7
Off
»
Factory configured - do not alter
S1/8
Off
»
56Kbps enabled
S2/1
Off

64Kbps enabled
S2/1
On
»
Network 64Kbps scrambler disabled
S2/2
Off

Network 64Kbps scrambler enabled
S2/2
On
»
Network V.54 loop code enabled
S2/3
Off

Network V.54 loop code disabled
S2/3
On
»
Network timing source enabled
S2/4
Off

Internal timing source enabled
S2/4
On
»
Serial port stop bits (2)
S2/5
Off

Serial port stop bits (1)
S2/5
On
»
Word length 8-bit enabled
S2/11
Off

Word length 7-bit enabled
S2/11
On
»
DIP switch configuration enabled
S2/12
Off

Terminal configuration enabled
S2/12
On
Note: Off corresponds to the 1 or closed position.

DATA PORT LOSS TYPE SELECTION
Setting
SW1/3
SW1/4
»
RTS mode enabled
Off
Off

DTR mode enabled
Off
On

Disabled
On
Off

SERIAL PORT RATE SELECTION
Setting
SW2/6
SW2/7
SW2/8

1200bps
Off
On
On

2400bps
Off
On
Off

4800bps
Off
Off
On
»
9600bps
Off
Off
Off

14.4Kbps
On
On
On

19.2Kbps
On
On
Off

28.8Kbps
On
Off
On

38.4Kbps
On
Off
Off

SERIAL PORT PARITY SELECTION
Setting
SW2/9
SW2/10
None
Off
Off
Odd
Off
On
Even
On
Off

DIAGNOSTIC LED(S)
LED
Color
Status
Condition
PWR
Green
On
DSU/CSU power is on and has passed the self test
PWR
Red
On
DSU/CSU power is on; self test failed. Light changes green after 10seconds
PWR
Red/Green
Blinking
DSU/CSU is downloading code
PWR
Yellow
Blinking
DSU/CSU power is on; self test is running
PWR
Yellow
On
DSU/CSU is on; test other than self test is running
PWR
None
Off
Power is off
NET
Green
On
DSU/CSU is receiving a signal from network
NET
Red
On
DSU/CSU cannot synchronize to network frame
NET
Red/Green
Blinking
DSU/CSU is detecting a frame error or illegal BPVs from network
NET
Yellow
On
DSU/CSU is detecting CMI, OOS, or OOF error signal from network
NET
None
Off
DSU/CSU is not receiving a signal from network
INB
Red
On
DSU/CSU is in frame relay in-band management mode; no packets or HDLC flags have been received from network
INB
Yellow
On
DSU/CSU is in frame relay in-band management mode; no frame relay packets have been detected network
INB
Green
On
DSU/CSU is in frame relay in-band management mode; frame relay packets have been detected network
INB
Red/Green
Blinking
Error detected in the frame relay packets received from network
INB
None
Off
DSU/CSU not in frame relay management mode
NLBK
Red
On
DSU or CSU loopback initiated by user or management station
NLBK
Red
Blinking
Loopback in progress: CSU simplex reversal occurring or DSU detecting non-latching codes in 56Kbps
NLBK
Red
Off
DSU or CSU loopback test not running
ACK
Yellow
On
Remote loop (up or down) detected - Press buttons to run (up) or (down) remote loop test
ACK
Yellow
Blinking
Remote loop (up or down) test successful
ACK
Yellow
Off
DSU/CSU remote loop test not running
DTE
Yellow
On
DTE loopback running: LT not asserted - Press button to run test
DTE
Yellow
Blinking
DTE loopback running: LT asserted
DTE
Yellow
Off
DTE loopback not running
TD
Green
On
DSU/CSU is detecting pulses from the DTE
TD
Green
Off
DSU/CSU is not detecting pulses from DTE
RD
Green
On
DSU/CSU is receiving pulses from network
RD
Green
Off
DSU/CSU is not receiving pulses from network
RTS
Yellow
On
RTS signal is high
RTS
Yellow
Off
RTS signal is low
CTS
Yellow
On
CTS signal is high
CTS
Yellow
Off
CTS signal is low
DTR
Yellow
On
DTR signal is high
DTR
Yellow
Off
DTR signal is low

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

SOLO 56/64 DSU/CSU (REV. B) modem/telephone/ISDN Settings and Configuration

Search

My Books

Discover

Card Type	DSU/CSU
NIC Type	T1
Chip Set	Unidentified
I/O Options	AC power connector, DC power connector, data port via 25-pin connector serial port (RS-232), network interface via 15-pin connector
Wiring Type	RJ-48 shielded twisted pair
Maximum Data Rate	56Kbps (64Kbps clear channel)
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AC power connector	CN1	Network port via 15-pin connector	CN4
DC power connector	CN2	Serial port	CN5
Data port via 25-pin connector	CN3	Fuse	F1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Data port format V.35 selected	S1/1	Off
	Data port format RS-449 selected	S1/1	On
»	Factory configured - do not alter	S1/2	Off
»	Factory configured - do not alter	S1/5	Off
»	Factory configured - do not alter	S1/6	Off
»	Factory configured - do not alter	S1/7	Off
»	Factory configured - do not alter	S1/8	Off
»	56Kbps enabled	S2/1	Off
	64Kbps enabled	S2/1	On
»	Network 64Kbps scrambler disabled	S2/2	Off
	Network 64Kbps scrambler enabled	S2/2	On
»	Network V.54 loop code enabled	S2/3	Off
	Network V.54 loop code disabled	S2/3	On
»	Network timing source enabled	S2/4	Off
	Internal timing source enabled	S2/4	On
»	Serial port stop bits (2)	S2/5	Off
	Serial port stop bits (1)	S2/5	On
»	Word length 8-bit enabled	S2/11	Off
	Word length 7-bit enabled	S2/11	On
»	DIP switch configuration enabled	S2/12	Off
	Terminal configuration enabled	S2/12	On
Note: Off corresponds to the 1 or closed position.

DATA PORT LOSS TYPE SELECTION
Setting		SW1/3	SW1/4
»	RTS mode enabled	Off	Off
	DTR mode enabled	Off	On
	Disabled	On	Off

SERIAL PORT RATE SELECTION
Setting		SW2/6	SW2/7	SW2/8
	1200bps	Off	On	On
	2400bps	Off	On	Off
	4800bps	Off	Off	On
»	9600bps	Off	Off	Off
	14.4Kbps	On	On	On
	19.2Kbps	On	On	Off
	28.8Kbps	On	Off	On
	38.4Kbps	On	Off	Off

SERIAL PORT PARITY SELECTION
Setting	SW2/9	SW2/10
None	Off	Off
Odd	Off	On
Even	On	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Green	On	DSU/CSU power is on and has passed the self test
PWR	Red	On	DSU/CSU power is on; self test failed. Light changes green after 10seconds
PWR	Red/Green	Blinking	DSU/CSU is downloading code
PWR	Yellow	Blinking	DSU/CSU power is on; self test is running
PWR	Yellow	On	DSU/CSU is on; test other than self test is running
PWR	None	Off	Power is off
NET	Green	On	DSU/CSU is receiving a signal from network
NET	Red	On	DSU/CSU cannot synchronize to network frame
NET	Red/Green	Blinking	DSU/CSU is detecting a frame error or illegal BPVs from network
NET	Yellow	On	DSU/CSU is detecting CMI, OOS, or OOF error signal from network
NET	None	Off	DSU/CSU is not receiving a signal from network
INB	Red	On	DSU/CSU is in frame relay in-band management mode; no packets or HDLC flags have been received from network
INB	Yellow	On	DSU/CSU is in frame relay in-band management mode; no frame relay packets have been detected network
INB	Green	On	DSU/CSU is in frame relay in-band management mode; frame relay packets have been detected network
INB	Red/Green	Blinking	Error detected in the frame relay packets received from network
INB	None	Off	DSU/CSU not in frame relay management mode
NLBK	Red	On	DSU or CSU loopback initiated by user or management station
NLBK	Red	Blinking	Loopback in progress: CSU simplex reversal occurring or DSU detecting non-latching codes in 56Kbps
NLBK	Red	Off	DSU or CSU loopback test not running
ACK	Yellow	On	Remote loop (up or down) detected - Press buttons to run (up) or (down) remote loop test
ACK	Yellow	Blinking	Remote loop (up or down) test successful
ACK	Yellow	Off	DSU/CSU remote loop test not running
DTE	Yellow	On	DTE loopback running: LT not asserted - Press button to run test
DTE	Yellow	Blinking	DTE loopback running: LT asserted
DTE	Yellow	Off	DTE loopback not running
TD	Green	On	DSU/CSU is detecting pulses from the DTE
TD	Green	Off	DSU/CSU is not detecting pulses from DTE
RD	Green	On	DSU/CSU is receiving pulses from network
RD	Green	Off	DSU/CSU is not receiving pulses from network
RTS	Yellow	On	RTS signal is high
RTS	Yellow	Off	RTS signal is low
CTS	Yellow	On	CTS signal is high
CTS	Yellow	Off	CTS signal is low
DTR	Yellow	On	DTR signal is high
DTR	Yellow	Off	DTR signal is low