G.703 FTEC/220(AC220V), G.703 FTEC/110(AC110V), modem/telephone/ISDN Settings and Configuration

Card Type	E1/T1 Converter
Chip Set	Unidentified
I/O Options	AC power, E1 network interface via BNC connectors (2), TTL clock in E1 network interface via 15-pin connector, 9-pin serial port T1 network interface via 15-pin connector, T1 network interface via bantam connectors (2)
E1 Transfer Rate	2.048Mbps
E1 Line Coding	HDB3
E1 Frame type	CCS, CAS, CRC4
T1 Transfer Rate	1.544Mbps
T1 Line Coding	AMI, B8ZS
T1 Frame type	D4, ESF
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AC power	CN1	E1 interface (BNC connector - transmit)	CN6
TTL clock in (bantam jack)	CN2	15-pin E1 network port	CN7
T1 interface (bantam jack - receive)	CN3	15-pin T1 network port	CN8
T1 interface (bantam jack - transmit)	CN4	9-pin serial port	CN9
E1 interface (BNC connector - receive)	CN5	Power switch	SW11

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	SW1/1	Off
»	E1 Time slot 1 enabled	SW1/2	On
	E1 Time slot 1 disabled	SW1/2	Off
»	E1 Time slot 2 enabled	SW1/3	On
	E1 Time slot 2 disabled	SW1/3	Off
»	E1 Time slot 3 enabled	SW1/4	On
	E1 Time slot 3 disabled	SW1/4	Off
»	E1 Time slot 4 enabled	SW1/5	On
	E1 Time slot 4 disabled	SW1/5	Off
»	E1 Time slot 5 enabled	SW1/6	On
	E1 Time slot 5 disabled	SW1/6	Off
»	E1 Time slot 6 enabled	SW1/7	On
	E1 Time slot 6 disabled	SW1/7	Off
»	E1 Time slot 7 enabled	SW1/8	On
	E1 Time slot 7 disabled	SW1/8	Off
»	E1 Time slot 8 enabled	SW2/1	On
	E1 Time slot 8 disabled	SW2/1	Off
»	E1 Time slot 9 enabled	SW2/2	On
	E1 Time slot 9 disabled	SW2/2	Off
»	E1 Time slot 10 enabled	SW2/3	On
	E1 Time slot 10 disabled	SW2/3	Off
»	E1 Time slot 11 enabled	SW2/4	On
	E1 Time slot 11 disabled	SW2/4	Off
»	E1 Time slot 12 enabled	SW2/5	On
	E1 Time slot 12 disabled	SW2/5	Off
»	E1 Time slot 13 enabled	SW2/6	On
	E1 Time slot 13 disabled	SW2/6	Off
»	E1 Time slot 14 enabled	SW2/7	On
	E1 Time slot 14 disabled	SW2/7	Off
»	E1 Time slot 15 enabled	SW2/8	On
	E1 Time slot 15 disabled	SW2/8	Off
»	E1 Time slot 16 disabled	SW3/1	Off
	E1 Time slot 16 enabled	SW3/1	On
»	E1 Time slot 17 enabled	SW3/2	On
	E1 Time slot 17 disabled	SW3/2	Off
»	E1 Time slot 18 enabled	SW3/3	On
	E1 Time slot 18 disabled	SW3/3	Off
»	E1 Time slot 19 enabled	SW3/4	On
	E1 Time slot 19 disabled	SW3/4	Off
»	E1 Time slot 20 enabled	SW3/5	On
	E1 Time slot 20 disabled	SW3/5	Off
»	E1 Time slot 21 enabled	SW3/6	On
	E1 Time slot 21 disabled	SW3/6	Off
»	E1 Time slot 22 enabled	SW3/7	On
	E1 Time slot 22 disabled	SW3/7	Off
»	E1 Time slot 23 enabled	SW3/8	On
	E1 Time slot 23 disabled	SW3/8	Off

USER CONFIGURABLE SETTINGS (CONT.)
» E1 Time slot 24 enabled		SW4/1	On
	E1 Time slot 24 disabled	SW4/1	Off
»	E1 Time slot 25 disabled	SW4/2	Off
	E1 Time slot 25 enabled	SW4/2	On
»	E1 Time slot 26 disabled	SW4/3	Off
	E1 Time slot 26 enabled	SW4/3	On
»	E1 Time slot 27 disabled	SW4/4	Off
	E1 Time slot 27 enabled	SW4/4	On
»	E1 Time slot 28 disabled	SW4/5	Off
	E1 Time slot 28 enabled	SW4/5	On
»	E1 Time slot 29 disabled	SW4/6	Off
	E1 Time slot 29 enabled	SW4/6	On
»	E1 Time slot 30 disabled	SW4/7	Off
	E1 Time slot 30 enabled	SW4/7	On
»	E1 Time slot 31 disabled	SW4/8	Off
	E1 Time slot 31 enabled	SW4/8	On
»	T1 Time slot 0 is data channel	SW5/1	Off
	T1 Time slot 0 is voice channel	SW5/1	On
»	T1 Time slot 1 is data channel	SW5/2	Off
	T1 Time slot 1 is voice channel	SW5/2	On
»	T1 Time slot 2 is data channel	SW5/3	Off
	T1 Time slot 2 is voice channel	SW5/3	On
»	T1 Time slot 3 is data channel	SW5/4	Off
	T1 Time slot 3 is voice channel	SW5/4	On
»	T1 Time slot 4 is data channel	SW5/5	Off
	T1 Time slot 4 is voice channel	SW5/5	On
»	T1 Time slot 5 is data channel	SW5/6	Off
	T1 Time slot 5 is voice channel	SW5/6	On
»	T1 Time slot 6 is data channel	SW5/7	Off
	T1 Time slot 6 is voice channel	SW5/7	On
»	T1 Time slot 7 is data channel	SW5/8	Off
	T1 Time slot 7 is voice channel	SW5/8	On
»	T1 Time slot 8 is data channel	SW6/1	Off
	T1 Time slot 8 is voice channel	SW6/1	On
»	T1 Time slot 9 is data channel	SW6/2	Off
	T1 Time slot 9 is voice channel	SW6/2	On
»	T1 Time slot 10 is data channel	SW6/3	Off
	T1 Time slot 10 is voice channel	SW6/3	On
»	T1 Time slot 11 is data channel	SW6/4	Off
	T1 Time slot 11 is voice channel	SW6/4	On
»	T1 Time slot 12 is data channel	SW6/5	Off
	T1 Time slot 12 is voice channel	SW6/5	On
»	T1 Time slot 13 is data channel	SW6/6	Off
	T1 Time slot 13 is voice channel	SW6/6	On
»	T1 Time slot 14 is data channel	SW6/7	Off
	T1 Time slot 14 is voice channel	SW6/7	On
»	T1 Time slot 15 is data channel	SW6/8	Off
	T1 Time slot 15 is voice channel	SW6/8	On

USER CONFIGURABLE SETTINGS (CONT.)
» T1 Time slot 16 is data channel		SW7/1	Off
	T1 Time slot 16 is voice channel	SW7/1	On
»	T1 Time slot 17 is data channel	SW7/2	Off
	T1 Time slot 17 is voice channel	SW7/2	On
»	T1 Time slot 18 is data channel	SW7/3	Off
	T1 Time slot 18 is voice channel	SW7/3	On
»	T1 Time slot 19 is data channel	SW7/4	Off
	T1 Time slot 19 is voice channel	SW7/4	On
»	T1 Time slot 20 is data channel	SW7/5	Off
	T1 Time slot 20 is voice channel	SW7/5	On
»	T1 Time slot 21 is data channel	SW7/6	Off
	T1 Time slot 21 is voice channel	SW7/6	On
»	T1 Time slot 22 is data channel	SW7/7	Off
	T1 Time slot 22 is voice channel	SW7/7	On
»	T1 Time slot 23 is data channel	SW7/8	Off
	T1 Time slot 23 is voice channel	SW7/8	On
»	T1 B8ZS line code enabled	SW8/1	Off
	T1 AMI line code enabled	SW8/1	On
»	T1 SF(D4) frame mode enabled	SW8/2	Off
	T1 ESF frame mode enabled	SW8/2	On
»	T1 jitter attenuator enabled	SW8/6	On
	T1 jitter attenuator disabled	SW8/6	Off
»	T1 jitter on received side	SW8/7	Off
	T1 jitter on transmitted side	SW8/7	On
»	Factory configured - do not alter	SW8/8	Off
»	Factory configured - do not alter	SW9/1	Off
»	E1 CRC4 disabled	SW9/2	Off
	E1 CRC4 enabled	SW9/2	On
»	E1 CCS(PCM31) frame mode enabled	SW9/3	Off
	E1 CAS(PCM30) frame mode enabled	SW9/3	On
»	E1 jitter attenuator enabled	SW10/4	On
	E1 jitter attenuator disabled	SW10/4	Off
»	E1 jitter on receive side	SW10/5	Off
	E1 jitter on transmit side	SW10/5	On
»	Factory configured - do not alter	SW10/6	On
»	Factory configured - do not alter	SW10/7	Off
»	Factory configured - do not alter	SW10/8	Off

LINE ATTENUATION & CABLE LENGTH SELECTION
DSX		CSU	S8/3	S8/4	S8/5
»	0 - 133 feet	0dB	Off	Off	Off
	133 - 266 feet	N/A	On	Off	Off
	266 - 399 feet	N/A	Off	On	Off
	399 - 533 feet	N/A	On	On	Off
	533 - 655 feet	N/A	Off	Off	On
	N/A	-7.5dB	On	Off	On
	N/A	-15dB	Off	On	On
	N/A	-22.5dB	On	On	On

E1 LINE IMPEDANCE
Setting		SW9/4	SW9/5	SW9/6	SW9/7	SW9/8
»	75 Ohm operation	Off	Off	Off	On	On
	120 Ohm operation	On	On	On	Off	Off

CLOCK MODE
Timing Source		SW10/1	SW10/2	SW10/3
»	Transparent	Off	Off	Off
	E1 side recovery	On	Off	Off
	Internal oscillator 2048Khz	Off	On	Off
	External 2048Khz	On	On	Off
	Loopback	Off	Off	On
	T1 side recovery	On	Off	On
	Internal oscillator 1544Khz	Off	On	On
	External 1544Khz	On	On	On

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Green	On	Power is on
PWR	Green	Off	Power is off
FAIL	Red	On	System failure detected
FAIL	Red	Off	System failure not detected
SGLS	Red	On	Receive signal loss detected
SGLS	Red	Off	Receive signal loss not detected
SCLS	Red	On	Loss of received frame syncronization detected
SCLS	Red	Off	Loss of received frame syncronization not detected
BPV	Red	On	Bipolar coding violation has been detected on network
BPV	Red	Off	Bipolar coding violation has not been detected on network
AIS	Red	On	All ones signal is being received on network line
AIS	Red	Off	All ones signal is not being received on network line
SLIP	Red	On	Elastic buffer slip has occurred
SLIP	Red	Off	Elastic buffer slip has not occurred
YEL	Red	On	Yellow alarm condition has been detected on network
YEL	Red	Off	Yellow alarm condition has not been detected on network
TST	Red	On	Device is conducting a loopback test
TST	Red	Off	Device is not conducting a loopback test
Note: Top row of LEDs indicate E1 network activity. Bottom row indicates T1 network activity

MISCELLANEOUS TECHNICAL NOTES

Timeslot switches are ignored in unframe mode. In framed mode, clock rate is determined by the number of timeslots enabled ( n ). In CAS mode, SW3/1 must be set to off position or a loopback test will occur. Cascading units must not be assigned identical or overlapping timeslots.