ARESCOM, INC
APEX 1100 (VER. 3.2.1)
Card Type | ISDN BRI Access Router |
Chip Set | Unidentified |
Wiring Type | Unshielded twisted pair |
I/O Options | Power, 10 BaseT Ethernet interface via RJ-45 connector, RJ-11 telephone line (2) Ethernet interface via BNC connector, 9-pin console port, ISDN BRI U interface via RJ-45 connector, |
Ethernet Transfer Rate | 10Mbps |
ISDN Data Rate | 128Kbps |
ISDN Modulation Protocol | PPP, MLPPP |
Line Coding | 2B1Q |
Data Bus | External |
CONNECTIONS | |||
Function | Label | Function | Label |
DC power connector | CN1 | ISDN BRI U interface (RJ-45) | CN5 |
9-pin DTE port | CN2 | Telephone line 1 (RJ-11) (Optional) | CN6 |
Ethernet interface (BNC) | CN3 | Telephone line 2 (RJ-11) (Optional) | CN7 |
10 BaseT Ethernet interface (RJ-45) | CN4 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PWR | Green | On | Power is on |
PWR | Green | Off | Power is off |
DGN | Green | Blinking (fast) | Power-up reboot is in progress |
DGN | Green | Blinking (slow) | Line connection has been established |
DGN | Green | Off | Connection is broken or SPID number registration failed |
ACT1 | Yellow | Blinking | Data is being transmitted/recieved on Ethernet interface |
ACT1 | Yellow | Off | Data is not being transmitted/recieved on Ethernet interface |
LN1 | Green | On | 10 BaseT connection is good |
LN1 | Green | Off | 10 BaseT connection is broken |
ACT2 | Yellow | Blinking | Data is being transmitted/recieved on ISDN interface |
ACT2 | Yellow | Off | Data is not being transmitted/recieved on ISDN interface |
LN2 | Green | Blinking (fast) | ISDN connection is broken or a loss of synchronization condition exists |
LN2 | Green | Blinking (slow) | ISDN connection is good |
P1 | Yellow | On | Telephone line 1 is off-hook |
P1 | Yellow | Off | Telephone line 1 is on-hook |
P2 | Yellow | On | Telephone line 2 is off-hook |
P2 | Yellow | Off | Telephone line 2 is on-hook |