APACHE MICRO PERIPHERALS, INC.
APACHE 1414I-M
Card Type | Modem (asynchronous) |
Chip Set | Rockwell ACi |
I/O Options | None |
Maximum Data Rate | 14.4Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | Unidentified |
Fax Class | Unidentified |
Data Modulation Protocol | Unidentified |
Fax Modulation Protocol | Unidentified |
Error Correction/Compression | MNP5, V.42, V.42bis |
APACHE-MICRO-PERIPHERALS-INC-Modem-asynchronous-AP-95
USER CONFIGURABLE SETTINGS | ||
Setting | Label | Position |
í Factory configured - do not alter | SW1/7 | Unidentified |
í Factory configured - do not alter | SW1/8 | N/A |
Note: SW1/8 may not be present on all models. | ||
INTERRUPT SELECTION | ||||
Setting | SW1/1 | SW1/2 | SW1/3 | SW1/4 |
í IRQ3 | Off | Off | Off | On |
IRQ4 | Off | Off | On | Off |
IRQ5 | Off | On | Off | Off |
IRQ7 | On | Off | Off | Off |
SERIAL PORT ADDRESS SELECTION | ||
Setting | SW1/5 | SW1/6 |
3F8h (COM1:) | On | On |
2F8h (COM2:) | Off | On |
3E8h (COM3:) | On | Off |
í 2E8h (COM4:) | Off | Off |
MISCELLANEOUS TECHNICAL NOTE |
Diagram not available. |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &L, &Q, &R, &S, &T, &V, &W, &Y, &Z |
Extended AT Commands |
\A, \B, \G, \K, \L, \N |
%C, %E, %L, %Q |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, S16, S18, S21, S22, S23, S25, S26, S27 |
S30, S36, S38, S46, S48, S82, S86, S95 |
Note: See MHI documentation for complete information. Registers S39, S40, and S41 are unidentified bit-mapped registers. |
Proprietary AT Command Set
See APACHE MICRO PERIPHERALS, INC. APACHE 1414I-V for a full command summary.