7 4 0 5 A V MAXTOR
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders | 989| |
Capacity form/unform 405/ MB Heads 3| 16| |
Seek time / track 12.0/ 3.0 ms Sector/track | 50| |
Controller IDE / ATA2 FAST/ENHA Precompensation
Cache/Buffer 32 KB ON-BOARD Landing Zone
Data transfer rate 4.750 MB/S int Bytes/Sector 512
11.100 MB/S ext PIO3
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 50 | -40 71
Power: sleep W Humidity % | 5 95
standby W Altitude km -0.061 3.048|
idle W Shock g 35 | 120
seek W Rotation RPM 3551
read/write W Acoustic dBA
spin-up W ECC Bit
MTBF h 300000
Warranty Month
Lift/Lock/Park YES Certificates
MAXTOR 7405AV JUMPER SETTING
+---------------------------------------------------------+ | J20******J25 | | COMPONENT SIDE ****** |XXI | |XXN | |XXT | |XXE | |XXR J1 | |XXF | |XXA | |XXC | |XXE | |XX | |XX | |XX | | 1 | |XX Power | |XX J3 +---------------------------------------------------------+ 1
MAXTOR 7405AV JUMPER SETTING
Jumper Setting
==============
Jumper Designation
------------------
+---------------- J20 Master/Slave
| +------------- J21 FACTORY RESERVED!
| | +---------- J22 FACTORY RESERVED!
* * * * * *
* * * * * *
| | +- J25 FACTORY RESERVED!
| +---- J24 Cable Select
+------- J23 Write Cache
J20 Master/Slave
----------------
J20 CLOSED Only drive in single drive system (default)
CLOSED Master drive in dual drive system (default)
OPEN Slave drive in dual drive system
J23 Write Cache
---------------
J23 OPEN Write Cache enabled (default)
CLOSED Write Cache disabled
J24 Cable Select
----------------
J24 OPEN Cable Select disabled (default)
CLOSED Cable Select enabled
NOTE
Jumpers J21 and J25 are factory reserved.
DC Power connector ------------------ pin 1 +12 VDC pin 2 +12 Volts Return pin 3 + 5 Volts Return pin 4 + 5 VDC
NEVER
Announced but never produced.
NEVER PRODUCED!!!