Hard Drive: FUJITSU: M2714T HORNET-6 1088MB 2.5"/SSL ATA2 FAST

M 2 7 1 4 T             H O R N E T - 6    FUJITSU
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 2.5"/SUPERSLIMLINE    Cylinders    3916|     |     |
Capacity form/unform  1088/      MB        Heads           3|     |     |
Seek time   / track  13.0/ 3.0 ms          Sector/track     |     |     |
Controller           IDE / ATA2 FAST/ENHA  Precompensation
Cache/Buffer           128 KB FIFO RING    Landing Zone
Data transfer rate    4.500 MB/S int       Bytes/Sector      512
                     16.700 MB/S ext PIO4
Recording method     PR4ML                          operating  | non-operating
                                                  -------------+--------------
Supply voltage     5 V          Temperature *C         5 55    |    -40 65
Power: sleep          0.2 W     Humidity     %         8 90    |      5 95
       standby        0.3 W     Altitude    km    -0.300  3.000| -0.300 12.000
       idle           0.8 W     Shock        g       100       |    300
       seek           2.0 W     Rotation   RPM      3600
       read/write     1.9 W     Acoustic   dBA        30
       spin-up            W     ECC        Bit   144BIT REED SOLOMON,SMART
                                MTBF         h     300000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

FUJITSU M271XTAU JUMPER SETTING

  +---------------------------------------------------------+
  |                                                         |XX
  |                                                         |XXI
  |                                                         |XXN
  |                                                         |XXT
  |                                                         |XXE
  |                                                         |XXR
  |                                                         |XXF
  |                                                         |XXA
  |                                                         |XXC
  |                                                         |XXE
  |                                                         |XX
  |                                                         |XX
  |                                                         |XX
  |                                                         |xxJumper
  +---------------------------------------------------------+

Jumpers

FUJITSU M271XTAU JUMPER SETTING

Jumper Setting
==============

  +CNH1--------Interface---------  MASTER
  |* *   * * * * * * * *
  |* *   * * * * * *
  +------------------

  +CNH1--------Interface---------  SLAVE
  |* *   * * * * * * * *
  |xxx   * * * * * *
  +------------------

  +CNH1--------Interface---------  CABLE SELECT
  |xxx   * * * * * * * *
  |* *   * * * * * *
  +------------------