lotus

previous page: Hard Drive: FUJITSU: M2634S 120MB 2.5"/SSL   SCSI2 SE
  
page up: Hard Drive Specs from FUJITSU
  
next page: Hard Drive: FUJITSU: M2635S 160MB 2.5"/SSL   SCSI2 SE

Hard Drive: FUJITSU: M2634T 120MB 2.5"/SSL IDE / AT




M 2 6 3 4 T    FUJITSU
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 2.5"/SUPERSLIMLINE    Cylinders    1574|  698|     |
Capacity form/unform   120/      MB        Heads           3|    6|     |
Seek time   / track  14.5/ 3.0 ms          Sector/track     |   56|     |
Controller           IDE / AT              Precompensation
Cache/Buffer           224 KB              Landing Zone
Data transfer rate    2.670 MB/S int       Bytes/Sector      512
                      8.000 MB/S ext
Recording method     RLL 1/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5 V          Temperature *C         5 55    |    -40 70
Power: sleep              W     Humidity     %         8 90    |      5 95
       standby        0.2 W     Altitude    km    -0.300  3.000| -0.300 12.000
       idle           1.8 W     Shock        g        10       |    100
       seek           2.5 W     Rotation   RPM      4500
       read/write         W     Acoustic   dBA        30
       spin-up            W     ECC        Bit   88-REED SOLOMON,ON THE FLY
                                MTBF         h     150000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

FUJITSU M2634T/35T/2636T JUMPER SETTING

  +---------------------------------------------------------+
  |                                                         |XX
  |                                                         |XXI
  |                                                         |XXN
  |                                                         |XXT
  |                                                         |XXE
  |                                                         |XXR
  |                                                         |XXF
  |                                                         |XXA
  |                                                         |XXC
  |                                                         |XXE
  |                                                         |XX
  |                                                         |XX
  |                                                         |XXMaster/
  |                                                         |xxSlave
  +---------------------------------------------------------+

Jumpers

FUJITSU M2634/35/36T JUMPER SETTING

Jumper Setting
==============

Master/Slave
------------
The drive only has a master/slave setting which is configured by
pins 2 & 4 of the interface connector. It should be noted that these
pins are horizontally adjacent to each other.

Pins 2-4 OPEN MASTER (Default)

           CLOSED  SLAVE

Install

-ANY DIREC.

Notes on installation
=====================

Installation direction
----------------------

     horizontally                           vertically
   +-----------------+             +--+                       +--+
   |                 |             |  +-----+           +-----+  |
   |                 |             |  |     |           |     |  |
 +-+-----------------+-+           |  |     |           |     |  |
 +---------------------+           |  |     |           |     |  |
                                   |  |     |           |     |  |
                                   |  |     |           |     |  |
 +---------------------+           |  +-----+           +-----+  |
 +-+-----------------+-+           +--+                       +--+
   |                 |
   |                 |
   +-----------------+

The drive will operate in all axis (6 directions).

Features

FUJITSU MEDIA DEFECTS

Media Defects
-------------
Before the unit leaves the factory, media defects are listed on the
MEDIA DEFECT LIST. This list is written on the media in the SA space
which is a reserved area of the disk.













TOP
previous page: Hard Drive: FUJITSU: M2634S 120MB 2.5"/SSL   SCSI2 SE
  
page up: Hard Drive Specs from FUJITSU
  
next page: Hard Drive: FUJITSU: M2635S 160MB 2.5"/SSL   SCSI2 SE