lotus



previous page: Hard Drive: CONNER: CP-30540 545MB 3.5"/SL    SCSI2 FAST
  
page up: Hard Drive Specs from CONNER
  
next page: Hard Drive: CONNER: CP-3100 105MB 3.5"/HH    SCSI1 SE

Hard Drive: CONNER: CP-30544 545MB 3.5"/SL IDE / AT




C P - 3 0 5 4 4    CONNER
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders    2243| 1023|     |
Capacity form/unform   545/      MB        Heads           6|   16|     |
Seek time   / track  10.0/ 2.0 ms          Sector/track     |   63|     |
Controller           IDE / AT              Precompensation
Cache/Buffer           256 KB              Landing Zone     1023
Data transfer rate    3.000 MB/S int       Bytes/Sector      512
                      6.000 MB/S ext
Recording method     RLL 1/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 60
Power: sleep              W     Humidity     %         5 95    |      5 95
       standby            W     Altitude    km    -0.061  3.048| -0.061 12.192
       idle           5.2 W     Shock        g         5       |     75
       seek           9.0 W     Rotation   RPM      5400
       read/write     6.5 W     Acoustic   dBA        40
       spin-up            W     ECC        Bit
                                MTBF         h     250000
                                Warranty Month        24
Lift/Lock/Park     YES          Certificates

Layout

CONNER CP30544 QUICK REFERENCE GUIDE REV. C, 12/1994

  +---------------------------------------------------------+  J6
  |  +-+                                                    |XXPower
  |  | |                                                    |xx1
  |  | |J1                                                  |XXI
  |  | |HDA                                                 |XXN
  |  | |                                                    |XXT
  |  +-+                                          E8++++++E2|XXE  J2
  |                                                ++++++++ |XXR
  |                                                BLOCK A  |XXF
  |                                                         |XXA
  |                                                         |XXC
  |                                                         |XXE
  |J3-+Spindle Sync                                         |XX
  | | |LED Drive Capability                                 |XX
  | | |                                                     |XX
  | | |ATA/ISA                                     ++       |  1
  | +-+C/D (Alternate to Jumper Block B)       +++++|BLOCK B|XX J4
  | xx LED                                     ++++++       |XX Power
  +---------------------------------------------------------+  1

Jumpers

CONNER CP30544 QUICK REFERENCE GUIDE REV. C, 12/1994

Jumper Setting
==============

Jumper Block B
--------------

      No spin on
       Power ON      +---DASP on pin 39 (DSP)
     +---+-+-+---+C/D+ o Spin Sync on pin 39 (SS)
     | o | o | o | o | o |
     | o | o | o | o | o |
     +---+---+-+-+---+---+
             ATA/ISA

C/D
---
Up to two drives may be daisy chained together utilizing the 40 pin
Task File connector. The maximum cable length is 18 inches. In order
to install more than one drive, it is necessary to set a jumper
option. The C/D jumper is used to determine whether the drive is
master (drive C) or slave (drive D). The drive is configured as a
master (drive C) when jumpered and as a slave drive (D drive) when
not jumpered.

DSP & SS
--------
This pair of jumpers determines the signals on pin 39 of the inter-
face connector.

 +---------+----------------------------------------------------+
 | Jumper  | Action                                             |
 |DSP  SS  |                                                    |
 +----+----+----------------------------------------------------+
 | X  |    | - Spindle synchronization signal disable on pin 39 |
 |    |    | - Activity LED signal available on pin 39          |
 +----+----+----------------------------------------------------+
 |    | X  | - Spindle synchronization signal enable on pin 39  |
 |    |    | - Activity LED signal disabled from pin 39         |
 +----+----+----------------------------------------------------+
 |    |    | - Pin 39 floating                                  |
 +----+----+----------------------------------------------------+

 +-----------------+-----------------+
 |                 |    Function     |
 +-----------------+--------+--------+
 |     Jumper      |ATA/CAM |Non-CAM |
 +--------+--------+--------+--------+
 |BLOCK A |   E2   | OUT    | IN     |
 +--------+--------+--------+--------+
 |BLOCK A |   E3   | OUT    | IN     |
 +--------+--------+--------+--------+
 |BLOCK A |   E4   | OUT    | IN     |
 +--------+--------+--------+--------+
 |BLOCK A |   E5   | IN     | OUT    |
 +--------+--------+--------+--------+
 |BLOCK A |   E6   | IN     | OUT    |
 +--------+--------+--------+--------+
 |BLOCK A |   E7   | IN     | OUT    |
 +--------+--------+--------+--------+
 |BLOCK A |   E8   | IN     | OUT    |
 +--------+--------+--------+--------+
 |BLOCK B |ATA/ISA | IN     | OUT    |
 +--------+--------+--------+--------+

Install

CONNER CP30544 QUICK REFERENCE GUIDE REV. C; 12/1994

Notes on Installation
=====================

Installation direction
----------------------

     horizontally                           vertically
   +-----------------+             +--+                       +--+
   |                 |             |  +-----+           +-----+  |
   |                 |             |  |     |           |     |  |
 +-+-----------------+-+           |  |     |           |     |  |
 +---------------------+           |  |     |           |     |  |
                                   |  |     |           |     |  |
                                   |  |     |           |     |  |
 +---------------------+           |  +-----+           +-----+  |
 +-+-----------------+-+           +--+                       +--+
   |                 |
   |                 |
   +-----------------+

The drive will operate in all axis (6 directions).

 J4 Standard 4-pin Power Connector
 ---------------------------------
 +-----------------------
 | +-----J4-----+ +----   pin 1  +12V
 | | 1  2  3  4 | | 1     pin 2   GND
 | +------------+ +--     pin 3   GND
 +------------------      pin 4   +5V

 J6 Alternate 3-pin Power Connector
 ----------------------------------
 +------------------------------
 | +--J6---+ +---   pin 1  +5 V
 | | 3 2 1 | | 40   pin 2  +12V
 | +-------+ +----  pin 3   GND
 +----------------------------------













TOP
previous page: Hard Drive: CONNER: CP-30540 545MB 3.5"/SL    SCSI2 FAST
  
page up: Hard Drive Specs from CONNER
  
next page: Hard Drive: CONNER: CP-3100 105MB 3.5"/HH    SCSI1 SE