WD1006V-MC1, WD1006V-MC2 Hard Disk/Floppy Controller Settings and Configuration
WESTERN DIGITAL CORPORATION
WD1006V-MC1, WD1006V-MC2
Data bus: MCA
Size: Full-length, half-height card
Hard drives supported: WD1006V-MC1:Two MFM ST506/412 drives
WD1006V-MC2:Two RLL ST506/412 drives
Floppy drives supported: None
CONNECTIONS | |
Function | Location |
20-pin data cable connector-drive 0 | CN2 |
20-pin data cable connector-drive 1 | CN3 |
34-pin control cable connector-hard drive | CN4 |
MISCELLANEOUS TECHNICAL NOTES |
There are no jumpers on the WD1006V-MCx. All configuring is done through dirmware. |
My Books
