W757BF-556 REV. 1 Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) Interface connector	JP1
2-pin connector - Drive active LED	JP2
34-pin control cable connector - floppy drive	JP7
15-pin game port - internal	JP8
10-pin serial port (COM2/3/4) - internal	JP9
10-pin serial port (COM1/3/4) - external	JP10
25-pin parallel port (LPT1/2/3) - external	JP11

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Parallel port is uni-directional	JP3	closed
	Parallel port is bi-directional	JP3	open
»	Hard drive port address is 1F0-1F7, 3F6 & 3F7h	JP5/jumper 1	pins 1 & 2 closed
	Hard drive port address is 170-177, 376 & 377h	JP5/jumper 1	pins 2 & 3 closed
»	Floppy drive port address is 3F0-3F7h	JP5/jumper 2	pins 1 & 2 closed
	Floppy drive port address is 370-377h	JP5/jumper 2	pins 2 & 3 closed
»	Floppy drive booting sequence A:/B:	JP5/jumper 3	pins 2 & 3 closed
	Floppy drive booting sequence B:/A:	JP5/jumper 3	pins 1 & 2 closed
»	Hard drive enabled	JP5/jumper 4	pins 2 & 3 closed
	Hard drive disabled	JP5/jumper 4	pins 1 & 2 closed
»	Floppy drive enabled	JP5/jumper 5	pins 2 & 3 closed
	Floppy drive disabled	JP5/jumper 5	pins 1 & 2 closed
»	Game port enabled	JP12	closed
	Game port disabled	JP12	open

SERIAL PORT CONFIGURATION
Port 1 (JP10)		JP4/jumper 1	JP4/jumper 2
»	COM1	pins 2 & 3 closed	pins 1 & 2 closed
	COM3	pins 1 & 2 closed	pins 2 & 3 closed
	COM4	pins 2 & 3 closed	pins 2 & 3 closed
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed

SERIAL PORT CONFIGURATION
Port 2 (JP9)		JP4/jumper 3	JP4/jumper 6
»	COM2	pins 2 & 3 closed	pins 1 & 2 closed
	COM3	pins 2 & 3 closed	pins 2 & 3 closed
	COM4	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed

PARALLEL PORT CONFIGURATION
LPT		JP4/jumper 4	JP4/jumper 5
»	LPT2	pins 2 & 3 closed	pins 1 & 2 closed
	LPT1	pins 2 & 3 closed	pins 2 & 3 closed
	LPT3	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed

SERIAL PORT INTERRUPT REQUEST
Port 1 (JP10)		JP6/jumper 1	JP6/jumper 2	JP6/jumper 3
»	IRQ4	Closed	Open	Open
	IRQ3	Open	Closed	Open
	IRQ5	Open	Open	Closed

SERIAL PORT INTERRUPT REQUEST
Port 2 (JP9)		JP6/jumper 4	JP6/jumper 5	JP6/jumper 6
»	IRQ3	Closed	Open	Open
	IRQ4	Open	Closed	Open
	IRQ5	Open	Open	Closed

PARALLEL PORT INTERRUPT REQUEST
IRQ		JP6/jumper 7	JP6/jumper 8
»	IRQ7	Closed	Open
	IRQ5	Open	Closed