MAGIC IDE-FDC Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
MAGIC IDE-FDC
Data bus: | 16-bit ISA |
Size: | Half-length, half-height card |
Hard drive supported: | Two IDE (AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE (AT) interface connector | CN1 |
34-pin control cable connector - floppy drive | CN2 |
USER CONFIGURABLE SETTINGS | |||
| Function | Location | Setting | |
| » | IDE(AT) interface enabled | JP1 | pins 1 & 2 closed |
IDE(AT) interface disabled | JP1 | pins 2 & 3 closed | |
| » | Floppy drive interface enabled | JP2 | pins 1 & 2 closed |
Floppy drive interface disabled | JP2 | pins 2 & 3 closed | |
My Books
