MAGIC I/O PM-540G Hard Disk/Floppy Controller Settings and Configuration

CONNECTIONS
Function	Location
4-pin connector-drive active LED	J1
40-pin IDE Interface (AT) connector	J2
34-pin control cable connector-floppy drive	J3
9-pin serial port 2 (COM2)-internal	J4
9-pin serial port 1 (COM1)-external	J5
25-pin parallel port-external	J6
15-pin game port-internal	J7

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	JP1 and JP2	closed
	Floppy drive disabled	JP1 and JP2	open

PARALLEL PORT (CN6) CONFIGURATION
LPT		JP3/pins 1 & 2	JP3/pins 3 & 4
»	LPT1 (378-37Fh)	open	closed
	LPT2 (278-27Fh)	closed	open
	Disabled	open	open

SERIAL PORT 2 (CN4) CONFIGURATION
COM		JP3/pins 5 & 6	JP3/pins 7 & 8
»	COM2 (2F8-2FFh)	open	closed
	COM4 (2E8-2EFh)	closed	open
	COM3 (3E8-3EFh)	closed	closed
	Disabled	open	open

SERIAL PORT 1 (CN5) CONFIGURATION
COM		JP3/pins 9 & 10	JP3/pins 11 & 12
»	COM1 (3F8-3FFh)	open	closed
	COM3 (3E8-3EFh)	closed	open
	COM4 (2E8-2EFh)	closed	closed
	Disabled	open	open

SERIAL PORT 1 (CN5) INTERRUPT REQUEST
IRQ		JP4/pins 1 & 2	JP4/pins 3 & 4	JP4/pins 5 & 6
»	IRQ4	closed	open	open
	IRQ5	open	closed	open
	IRQ9	open	open	closed

SERIAL PORT 2 (CN4) INTERRUPT REQUEST
IRQ		JP4/pins 7 & 8	JP4/pins 9 & 10	JP4/pin 11 & 12
»	IRQ3	closed	open	open
	IRQ9	open	closed	open
	IRQ5	open	open	closed

PARALLEL PORT (CN6) INTERRUPT REQUEST
IRQ		JP4/pins 13 & 14	JP4/pins 15 & 16
»	IRQ7	open	closed
	IRQ5	closed	open
	Disabled	open	open