IODE-3298WEI Hard Disk/Floppy Controller Settings and Configuration

Chipset	Winbond
Data Bus	16-bit ISA
Card Size	Half height, half length
Hard Drives Supported	Two IDE(AT) devices

CONNECTIONS
Function	Label	Function	Label
34-pin cable connector - floppy drive	J1	10-pin serial port 2 - internal	J5
40-pin IDE(AT) connector	J2	25-pin parallel port - external	J6
16-pin game port	J3	2-pin drive active LED	J8
9-pin serial port 1 - external	J4

USER CONFIGURABLE SETTINGS
Setting	Label	Position
IDE(AT) interface enabled	JP2/A	Pins 1 & 2 closed
IDE(AT) interface disabled	JP2/A	Pins 2 & 3 closed
IDE address is 1F0h	JP2/B	Pins 1 & 2 closed
IDE address is 170h	JP2/B	Pins 2 & 3 closed
Floppy drive interface enabled	JP2/C	Pins 1 & 2 closed
Floppy drive interface disabled	JP2/C	Pins 2 & 3 closed
Floppy drive order is normal (A:, B:)	JP2/D	Pins 1 & 2 closed
Floppy drive order is reversed (B:, A:)	JP2/D	Pins 2 & 3 closed
Parallel port interrupt is IRQ7	JP3/A	Pins 1 & 2 closed
Parallel port interrupt is IRQ5	JP3/A	Pins 2 & 3 closed
Game port enabled	JP4	Closed
Game port disabled	JP4	Open
IDE interrupt is IRQ14	J7	Pins 3 & 4 closed
IDE interrupt is IRQ15	J7	Pins 1 & 2 closed
Note:J7 may not be present on all versions of this card.

SERIAL PORT 1 ADDRESS SELECTION
Setting	JP1/A	JP1/B
3F8h (COM1:)	Pins 1 & 2 closed	Pins 1 & 2 closed
3E8h (COM3:)	Pins 2 & 3 closed	Pins 2 & 3 closed
2E8h (COM4:)	Pins 1 & 2 closed	Pins 2 & 3 closed
Disabled	Pins 2 & 3 closed	Pins 1 & 2 closed

SERIAL PORT 2 ADDRESS SELECTION
Setting	JP1/C	JP1/D
2F8h (COM2:)	Pins 1 & 2 closed	Pins 1 & 2 closed
3E8h (COM3:)	Pins 1 & 2 closed	Pins 2 & 3 closed
2E8h (COM4:)	Pins 2 & 3 closed	Pins 2 & 3 closed
Disabled	Pins 2 & 3 closed	Pins 1 & 2 closed

PARALLEL PORT ADDRESS SELECTION
Setting	JP1/E	JP1/F
378h	Pins 1 & 2 closed	Pins 1 & 2 closed
3BCh	Pins 1 & 2 closed	Pins 2 & 3 closed
278h	Pins 2 & 3 closed	Pins 2 & 3 closed
Disabled	Pins 2 & 3 closed	Pins 1 & 2 closed

PARALLEL PORT MODE SELECTION
Setting	JP3/B	JP3/C	JP5	JP6
Unidirectional	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
EPP	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
ECP	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 3 closed	Pins 1 & 3 closed