IDE5 Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
IDE5
Data bus: | 16-bit, ISA |
Size: | half-length, full-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE (AT) Interface connector | CN1 |
34-pin control cable connector - floppy drive | CN2 |
4-pin connector - drive active LED | CN3 |
USER CONFIGURABLE SETTINGS | ||
Function | Location | Setting |
Floppy drive port enabled | JP5 | closed |
Floppy drive port disabled | JP5 | open |
Hard disk port enabled | JP6 | closed |
Hard disk port disabled | JP6 | open |
My Books
