GW2760WX SUPER I/O CARD Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE(AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) Interface connector	CN1
34-pin control cable connection - floppy drive	CN2
15-pin game port - external	CN3
25-pin parallel port (LPT1/2) - external	CN4
2-pin connector - Drive Active LED	CN5
10-pin serial port 1 (COM1/3) - internal	CN6
10-pin serial port 2 (COM2/4) - internal	CN7

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	JP1	pins 2 & 3 closed
	Floppy drive disabled	JP1	pins 1 & 2 closed
»	Hard drive enabled	JP2	pins 2 & 3 closed
	Hard drive disabled	JP2	pins 1 & 2 closed
»	Serial port 1 set to IRQ4	JP9	pins 2 & 3 closed
	Serial port 1 set to IRQ3	JP9	pins 1 & 2 closed
»	Serial port 2 set to IRQ3	JP10	pins 1 & 2 closed
	Serial port 2 set to IRQ4	JP10	pins 2 & 3 closed
»	Parallel port set to IRQ7	JP11	pins 1 & 2 closed
	Parallel port set to IRQ5	JP11	pins 2 & 3 closed

SERIAL PORT 1 CONFIGURATION
COM		Jumper JP3	Jumper JP4
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed
»	COM1 (3F8-3FFh)	pins 2 & 3 closed	pins 1 & 2 closed
	COM3 (3E8-3EFh)	pins 1 & 2 closed	pins 2 & 3 closed
	COM4 (2E8-2EFh)	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION
COM		Jumper JP5	Jumper JP6
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed
»	COM2 (2F8-2FFh)	pins 2 & 3 closed	pins 1 & 2 closed
	COM4 (2E8-2EFh)	pins 1 & 2 closed	pins 2 & 3 closed
	COM3 (3E8-3EFh)	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT CONFIGURATION
LPT		Jumper JP7	Jumper JP8
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed
	LPT3 (278-27Fh)	pins 2 & 3 closed	pins 1 & 2 closed
»	LPT2 (378-37Fh)	pins 1 & 2 closed	pins 2 & 3 closed
	LPT1 (3BC-3BFh)	pins 2 & 3 closed	pins 2 & 3 closed