S1366 Hard Disk/Floppy Controller Settings and Configuration
TYAN COMPUTER
S1366
Data bus: | 32-bit PCI |
Size: | Half-length, full-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
25 pin parallel port - external | CN1 |
9 pin serial port - external | CN2 |
10 pin serial port - internal | CN3 |
16 pin game port - internal | CN4 |
34 pin data cable connector - primary floppy drive interface | CN5 |
34 pin data cable connector - secondary floppy drive interface | CN6 |
40 pin connector - primary IDE(AT) interface | CN7 |
40 pin connector - secondary IDE(AT) interface | CN8 |
4 pin connector - drive active LED | CN9 |
S136x paddle card daughterboard connector | PDL1 |
USER CONFIGURABLE SETTINGS | ||
Function | Location | Setting |
» Factory configured - do not alter | J0 | N/A |
» Floppy drive interface DSKCHG signal not intercepted | J1 | Open |
Floppy drive interface DSKCHG signal intercepted | J1 | Closed |
» I/O address fixed | J2 | Closed |
I/O address relocatable | J2 | Open |
» Primary IDE(AT) channel legacy IRQ tied to IRQ14 | J5 | Closed |
No primary IDE(AT) channel legacy IRQ tied to IRQ14 | J5 | Open |
» Primary IDE(AT) legacy ISA IRQ14 not buffered | J6 | Open |
Primary IDE(AT) legacy ISA IRQ14 buffered | J6 | Closed |
» Secondary IDE(AT) channel legacy IRQ tied to IRQ15 | J7 | Closed |
No secondary IDE(AT) channel legacy IRQ tied to IRQ15 | J7 | Open |
» Secondary IDE(AT) legacy ISA IRQ15 not buffered | J8 | Open |
Secondary IDE(AT) legacy ISA IRQ15 buffered | J8 | Closed |
» IDE(AT) interrupt native mode not utilized | J9 | Open |
IDE(AT) interrupt native mode utilized to PCI INTA | J9 | Closed |
» Factory configured - do not alter | J10 | N/A |
» AT printer mode(ISA) enabled | J11 | Open |
Normal mode enabled, floppy drive interface pin 29 grounded | J11 | Closed |
» Floppy drive interface normal DRATE out mode select | P1 | Pins 2 & 3 closed |
Floppy drive interface media ID input OS2 enhanced mode | P1 | Pins 1 & 2 closed |
» Floppy drive interface I/O address 3F0h select | P2 | Pins 2 & 3 closed |
Floppy drive interface I/O address 370h select | P2 | Pins 1 & 2 closed |
» Floppy drive interface enabled | P3 | Pins 2 & 3 closed |
Floppy drive interface disabled | P3 | Pins 1 & 2 closed |
» Factory configured - do not alter | T0 | N/A |
» ISA AT printer mode enabled | T1 | Open |
PS/2 bi-directional printer mode enabled | T1 | Closed |
» Parallel port interrupt IRQ7 select | T2 | Closed |
Parallel port interrupt disabled | T2 | Open |
» Serial port 1 interrupt IRQ4 select | T4 | Closed |
Serial port 1 interrupt disabled | T4 | Open |
» Serial port 2 interrupt IRQ3 select | T5 | Closed |
Serial port 2 interrupt disabled | T5 | Open |
» Game port enabled | T6 | Closed |
Game port disabled | T6 | Open |
PCI IDE CONFIGURATION | ||
Setting | J3 | J4 |
» PCI IDE channels enabled | Closed | Open |
PCI IDE channels disabled | Open | Closed |
SECONDARY IDE PCI INTERRUPT CONFIGURATION | ||
Setting | J12 | J13 |
» Secondary IDE interrupt not inverted(PCI bus INTB#) | Open | N/A |
Secondary IDE interrupt inverted(PCI bus INTB#) | N/A | Closed |
PRIMARY IDE PCI INTERRUPT CONFIGURATION | ||
Setting | T12 | T13 |
» Primary IDE interrupt not inverted(PCI bus INTA#) | Open | N/A |
Primary IDE interrupt inverted(PCI bus INTA#) | N/A | Closed |
PARALLEL PORT I/O ADRESS SELECT | ||
Address | P8 | P9 |
» 378-37Fh | Pins 2 & 3 closed | Pins 2 & 3 closed |
278-27Fh | Pins 2 & 3 closed | Pins 1 & 2 closed |
3BC-3BEh | Pins 1 & 2 closed | Pins 1 & 2 closed |
Disabled | Pins 1 & 2 closed | Pins 2 & 3 closed |
PRIMARY SERIAL PORT I/O ADRESS SELECT | ||
Address | P4 | P5 |
» 3F8h (COM1) | Pins 2 & 3 closed | Pins 2 & 3 closed |
2F8h (COM2) | Pins 2 & 3 closed | Pins 1 & 2 closed |
3E8h (COM3) | Pins 1 & 2 closed | Pins 2 & 3 closed |
Disabled | Pins 1 & 2 closed | Pins 1 & 2 closed |
SECONDARY SERIAL PORT I/O ADRESS SELECT | ||
Address | P6 | P7 |
» 2F8h (COM2) | Pins 2 & 3 closed | Pins 2 & 3 closed |
2E8h (COM4) | Pins 1 & 2 closed | Pins 2 & 3 closed |
3F8h (COM1) | Pins 2 & 3 closed | Pins 1 & 2 closed |
Disabled | Pins 1 & 2 closed | Pins 1 & 2 closed |
PARALLEL PORT INTERRUPT SELECT | ||
IRQ | T2 | T3 |
» IRQ7 | Closed | Open |
IRQ5 | Open | Closed |
Disabled | Open | Open |
ENHANCED PARALLEL PORT MODE CONFIGURATION | ||
Modes Supported | P10 | P11 |
» PRN | Pins 2 & 3 closed | Pins 2 & 3 closed |
PRN, EPP | Pins 1 & 2 closed | Pins 2 & 3 closed |
PRN, ECP | Pins 2 & 3 closed | Pins 1 & 2 closed |
PRN, ECP, EPP | Pins 1 & 2 closed | Pins 1 & 2 closed |
ECP MODE CONFIGURATION | |||||
Setting | T7 | T8 | T9 | T10 | T11 |
» ECP mode disabled | Open | Open | Open | Open | Open |
ECP mode w/DMA1 | Closed | Open | Closed | Open | Closed |
ECP mode w/DMA3 | Open | Closed | Open | Closed | Closed |
SERIAL PORT INTERRUPT SELECT | ||||
Port 1 | Port 2 | T3 | T4 | T5 |
IRQ4 | IRQ3 | open | closed | closed |
IRQ4 | Disabled | open | closed | open |
Disabled | IRQ3 | open | open | closed |
IRQ3 | IRQ4 | open | T4 pin 1 to T5 pin 1 | |
|
|
| T4 pin 2 to T5 pin 2 | |
IRQ5 | IRQ3 | open | T4 pin 1 to T5 pin 1 | |
Disabled | IRQ4 | open | T4 pin 2 to T5 pin 2 | |
IRQ4 | IRQ5 | T3 pin 2 to T4 pin 2 | closed | |
Disabled | IRQ5 | T3 pin 2 to T4 pin 2 | open | |
MISCELLANEOUS TECHNICAL NOTES |
Note: In order to utilize the S1366's IDE and I/O functions, the S136x paddle card must be installed on connector PDL1 |
My Books
