250-1095 Hard Disk/Floppy Controller Settings and Configuration
TANDY/RADIO SHACK
250-1095
Card type | Hard drive controller |
Hard Drives supported | Two IDE (AT) drives |
Floppy drives supported | None |
Data Bus | 8-bit ISA |
Card Size | Full-length, full-height card |
CONNECTIONS | |
Function | Location |
40-pin primary IDE(AT) connector | CN1 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Factory configured - do not alter | E3 | Open |
| » | Factory configured - do not alter | E4 | Open |
| » | Factory configured - do not alter | E5 | Open |
| » | Factory configured - do not alter | E6 | Open |
| » | Factory configured - do not alter | E7 | Open |
BIOS ADDRESS SELECTION | |||
Address | E1 | E2 | |
| » | C8000h | Open | Open |
CA000h | Closed | Open | |
CC000h | Open | Closed | |
CE000h | Closed | Closed | |
My Books
