MYLEX CORPORATION
DAC960PJ
Card Type | Hard drive controller card |
Maximum Onboard Memory | 128MB DRAM |
Boot ROM | Available |
Hard Drives supported | Up to 45 SCSI devices |
Floppy drives supported | None |
Data Bus | 32-bit PCI |
Card Size | Full-length, full-height card |
CONNECTIONS | |||
Function | Location | Function | Location |
68-pin SCSI connector - external | CN1 | 68-pin SCSI connector - internal | CN5 |
68-pin SCSI connector - external | CN2 | Battery backup plug connector | J5 |
68-pin SCSI connector - internal | CN3 | 6-pin LED connector | JP4 |
68-pin SCSI connector - internal | CN4 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Factory configured - do not alter | JP5 | Reserved |
» | Factory configured - do not alter | JP10 | Open |
» | Factory configured - do not alter | JP12 | Pins 1 & 2 closed |
DRAM CONFIGURATION | |
Size | Bank 0 |
4MB | (1) 1MB x 36 |
8MB | (1) 2MB x 36 |
16MB | (1) 4MB x 36 |
32MB | (1) 8MB x 36 |
64MB | (1) 16MB x 36 |
128MB | (1) 32MB x 36 |
MISCELLANEOUS TECHNICAL NOTES |
If battery backup is not installed a loopback plug must be installed in J5. |