DAC960PG Hard Disk/Floppy Controller Settings and Configuration

Card Type	Hard drive controller card
Maximum onboard memory	128MB
Hard Drives supported	Up to 45 SCSI devices
Floppy drives supported	None
Data Bus	32-bit PCI
Card Size	Full-length, full-height card

CONNECTIONS
Function	Location	Function	Location
68-pin SCSI connector channel 0 - external	CN1	68-pin SCSI connector channel 2 - internal	CN5
68-pin SCSI connector channel 1 - external	CN2	4-pin connector - drive active LED	JP4
68-pin SCSI connector channel 0 - internal	CN3	Battery backup connector	J5
68-pin SCSI connector channel 1 - internal	CN4

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	JP5	Unidentified
»	Factory configured - do not alter	JP10	Open
»	Factory configured - do not alter	JP12	Pins 1 & 2 closed

DRAM CONFIGURATION
Size	Bank 0
4MB	(1) 1MB x 36
8MB	(1) 2MB x 36
16MB	(1) 4MB x 36
32MB	(1) 8MB x 36
64MB	(1) 16MB x 36
128MB	(1) 32MB x 36

MISCELLANEOUS TECHNICAL NOTES

Note: If battery backup is not installed, a loopback plug must be installed.