LCS-6210D/W Hard Disk/Floppy Controller Settings and Configuration
LONGSHINE MICROSYSTEM, INC.
LCS-6210D/W
Data bus: 8-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two ST506/412 MFM drives
Floppy drives supported: None
CABLE CONNECTIONS | |
Function | Location |
4-pin connector-drive active LED | J1 |
5-pin connector-DC power | J2 |
20-pin data cable connector-drive 0 | J3 |
20-pin data cable connector-drive 1 | J4 |
34-pin control cable connector-hard drives | J5 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Factory configured--do not alter | JP7 | open |
| » | Factory configured--do not alter | JP8 | open |
| » | Interrupt Request is IRQ5 | JP9 | open |
Interrupt Request is IRQ2 | JP9 | closed | |
DRIVE SELECT JUMPERS | |||||
Cap. (Hds. x Cyls. x SPT) | JP1 - Drv 0 | JP2 - Drv 0 | JP3 - Drv 1 | JP4 - Drv 1 | |
| » | 21MB (4x612x17) | closed | closed | closed | closed |
10MB (4x306x17) | open | closed | open | closed | |
10MB (2x615x17) | closed | open | closed | open | |
21MB (4x615x17) | open | open | open | open | |
BIOS AND PORT ADDRESS JUMPERS | ||||
Address | Port address | JP5 | JP6 | |
| » | C8000h | 320-323h | open | open |
CA000h | 324-327h | closed | open | |
MISCELLANEOUS TECHNICAL NOTES |
To allow system to be XT compatable, jumper JP10 must be open. |
My Books
