LCS-6617 Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Full-length, full-height card
Hard drive supported:	Two RLL ST506/412 drives
Floppy drives supported:	None

CONNECTIONS
Function	Location
20-pin data cable connector - drive 1	J1
20-pin data cable connector - drive 2	J2
34-pin control cable connector - hard drive	J3
4-pin connector - drive active LED	J4

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	1:2 interleave ratio selected	J5	pins 1 & 2 closed
	1:3 interleave ratio selected	J5	pins 2 & 3 closed
»	DOS compatibility selected	J6	pins 2 & 3 closed
	XENIX and DOS compatibility selected	J6	pins 1 & 2 closed
»	C & T chipset installed	J7	pins 1 & 2 closed
	Other chipset installed	J7	pins 2 & 3 closed
»	HDD address = 1F0h	J8	pins 1 & 2 closed
	HDD address = 170h	J8	pins 2 & 3 closed

BIOS CONFIGURATION
Address		J9	J10
»	C800h	pins 1 & 2 closed	pins 2 & 3 closed
	D800h	pins 2 & 3 closed	pins 2 & 3 closed
	Disabled	N/A	pins 1 & 2 closed