KTM-DCAT/127, KTM-DCAT/209, KTM-DCAT/260, Hard Disk/Floppy Controller Settings and Configuration

Card Type	Memory card, Fixed hard drive, Hard drive controller card
Maximum Onboard Memory	16MB DRAM
Hard Drives supported	One fixed proprietary drive
Data Bus	16-bit ISA
Card Size	Full-length, full-height card

CONNECTIONS
Function	Label
Proprietary hard drive interface	CN1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Memory disabled	SW1/1	On
	Memory enabled	SW1/1	Off
»	Card is first memory board in PC	SW1/2	On
	Card is second memory board in PC	SW1/2	Off
»	Factory configured - do not alter.	SW1/3	On
»	Parity checking enabled	SW1/6	On
	Parity checking disabled	SW1/6	Off

ROM ADDRESS SELECT
Address		SW1/4	SW1/5
»	C800h (non-bootable)	On	On
	CC00h (non-bootable)	Off	On
	D800h (non-bootable)	On	Off
	DC00h (bootable)	Off	Off

BANK 1 DRAM CONFIGURATION
Size	SW2/1	SW2/2
No SIMMs installed	On	On
2MB ((2) x 1MB )	Off	On
8MB ((2) x 4MB)	Off	Off
Note: Bank 1 is market as P1 and P2 on the card (exact location unidentified). Bank 1 must be filled first before memory in Bank 2 can be detected.

BANK 2 DRAM CONFIGURATION
Size	SW2/1	SW2/2
No SIMMs installed	On	On
2MB ((2) x 1MB )	Off	On
8MB ((2) x 4MB)	Off	Off
Note: Bank 2 is market as P3 and P4 on the card (exact location unidentified). Bank 1 must be filled first before memory in Bank 2 can be detected.