UN-1061 Hard Disk/Floppy Controller Settings and Configuration

INFORMTECH INTERNATIONAL, INC.

UN-1061

Data bus:
16-bit, ISA
Size:
Half-length, Full-height card
Hard drive supported:
Two IDE (AT) Interface drives
Floppy drives supported:
360KB, 720KB, 1.2MB, 1.44MB

CONNECTIONS
Function
Location
4-pin connector - drive active LED
P1
40-pin IDE(AT) interface
P2
34-pin control cable connector - floppy drive
P3
9-pin serial port 2 - internal
P4
9-pin serial port 1 - internal
P5
15-pin connector - game port
P6
25-pin parallel port - external
P7

USER CONFIGURABLE SETTINGS
Function
Location
Setting
»
Data bit 7 is HD7
J1
pins 1 & 2 closed

Data bit 7 is D7
J1
pins 2 & 3 closed
»
Serial port 2 enabled
J2
pins 1 & 2 closed

Serial port 2 disabled
J2
pins 2 & 3 closed

USER CONFIGURABLE SETTINGS(CONTINUED)
Function
Location
Setting
»
Parallel port enabled
J3
pins 1 & 2 closed

Parallel port disabled
J3
pins 2 & 3 closed
»
IDE interface enabled
J4
pins 1 & 2 closed

IDE interface enabled
J4
pins 2 & 3 closed
»
Floppy drive interface enabled
J5
pins 1 & 2 closed

Floppy drive interface disabled
J5
pins 2 & 3 closed
»
Serial port 2 address 2F8 - 2FFh select
J6
pins 1 & 2 closed

Serial port 2 address 2E8 - 2EFh select
J6
pins 2 & 3 closed
»
Serial port 1 address 3F8 - 3FFh select
J7
pins 1 & 2 closed

Serial port 1 address 3E8 - 3EFh select
J7
pins 2 & 3 closed
»
Serial port 1 enabled
J8
pins 1 & 2 closed

Serial port 1 disabled
J8
pins 2 & 3 closed
»
Parallel port address 378 - 37Fh select
J9
pins 1 & 2 closed

Parallel port address 278 - 27Fh select
J9
pins 2 & 3 closed
»
Floppy drive interface address 3F0 - 3F7h select
J10
pins 1 & 2 closed

Floppy drive interface address 370 - 377h select
J10
pins 2 & 3 closed
»
Factory configured - do not alter
J11
pins 1 & 2 closed
»
Factory configured - do not alter
J12
N/A
»
IDE interface primary address select
J13
pins 1 & 2 closed

IDE interface alternate address select
J13
pins 2 & 3 closed

SERIAL PORT 1 INTERRUPT SELECT
IRQ
JP4/A
JP4/B
JP4/C
JP4/D
»
IRQ4
N/A
N/A
Pins 2 & 3
N/A

IRQ2
Pins 2 & 3
N/A
N/A
N/A

IRQ3
N/A
Pins 2 & 3
N/A
N/A

IRQ5
N/A
N/A
N/A
Pins 2 & 3
Note: All pins designated should be in the closed position.

SERIAL PORT 2 INTERRUPT SELECT
IRQ
JP4/A
JP4/B
JP4/C
JP4/D
»
IRQ3
N/A
Pins 1 & 2
N/A
N/A

IRQ2
Pins 1 & 2
N/A
N/A
N/A

IRQ4
N/A
N/A
Pins 1 & 2
N/A

IRQ5
N/A
N/A
N/A
Pins 1 & 2
Note: All pins designated should be in the closed position.

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

UN-1061 Hard Disk/Floppy Controller Settings and Configuration

Search

My Books

Discover


Data bus:	16-bit, ISA
Size:	Half-length, Full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, 1.44MB

CONNECTIONS
Function	Location
4-pin connector - drive active LED	P1
40-pin IDE(AT) interface	P2
34-pin control cable connector - floppy drive	P3
9-pin serial port 2 - internal	P4
9-pin serial port 1 - internal	P5
15-pin connector - game port	P6
25-pin parallel port - external	P7

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Data bit 7 is HD7	J1	pins 1 & 2 closed
	Data bit 7 is D7	J1	pins 2 & 3 closed
»	Serial port 2 enabled	J2	pins 1 & 2 closed
	Serial port 2 disabled	J2	pins 2 & 3 closed

SERIAL PORT 1 INTERRUPT SELECT
IRQ		JP4/A	JP4/B	JP4/C	JP4/D
»	IRQ4	N/A	N/A	Pins 2 & 3	N/A
	IRQ2	Pins 2 & 3	N/A	N/A	N/A
	IRQ3	N/A	Pins 2 & 3	N/A	N/A
	IRQ5	N/A	N/A	N/A	Pins 2 & 3
Note: All pins designated should be in the closed position.

SERIAL PORT 2 INTERRUPT SELECT
IRQ		JP4/A	JP4/B	JP4/C	JP4/D
»	IRQ3	N/A	Pins 1 & 2	N/A	N/A
	IRQ2	Pins 1 & 2	N/A	N/A	N/A
	IRQ4	N/A	N/A	Pins 1 & 2	N/A
	IRQ5	N/A	N/A	N/A	Pins 1 & 2
Note: All pins designated should be in the closed position.