IT-PACK5 VER.1.0 Hard Disk/Floppy Controller Settings and Configuration
INFORMTECH INTERNATIONAL, INC.
IT-PACK5 VER.1.0
Data bus: | 16-bit ISA |
Size: | Mid-length, full-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives |
CONNECTIONS | |
Function | Location |
25-pin parallel port external | CN1 |
10-pin serial port external | CN2 |
10-pin serial port internal | CN3 |
15-pin game port internal | CN4 |
40-pin IDE (AT) Interface connector | CN5 |
34-pin control cable connector floppy drive | CN6 |
4-pin connector - Drive active LED | CN7 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Parallel Port IRQ7 | JP1 | Pins 2 & 3 closed |
Parallel Port IRQ5 | JP1 | Pins 1 & 2 closed | |
| » | Hard disk primary address - 1F0 - 1F7h | JP9 | Open |
Hard disk secondary address - 170 - 177h | JP9 | Closed | |
| » | Parallel port is uni-directional | JP13 | Open |
Parallel port is bi-directional | JP13 | Closed | |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Serial Port 1 enabled | SW1/1 | On |
Serial Port 1 disabled | SW1/1 | Off | |
| » | Serial Port 2 enabled | SW1/2 | On |
Serial Port 2 disabled | SW1/2 | Off | |
| » | Floppy drive port address is 3F0-3F7h | SW1/8 | Off |
Floppy drive port address is 370-377h | SW1/8 | On | |
SERIAL PORT 1 INTERRUPT REQUEST | |||||||
IRQ | JP2 | JP4 | JP5 | JP6 | JP7 | JP8 | |
| » | IRQ4 | All open | 1 & 2 | All open | All open | All open | All open |
IRQ9 | 1 & 2 | All open | All open | All open | All open | All open | |
IRQ10 | All open | All open | 1 & 2 | All open | All open | All open | |
IRQ11 | All open | All open | All open | 1 & 2 | All open | All open | |
IRQ12 | All open | All open | All open | All open | 1 & 2 | All open | |
IRQ15 | All open | All open | All open | All open | All open | 1 & 2 | |
SERIAL PORT 2 INTERRUPT REQUEST | |||||||
IRQ | JP2 | JP3 | JP5 | JP6 | JP7 | JP8 | |
| » | IRQ3 | Open | 2 & 3 | All open | All open | All open | All open |
IRQ9 | 2 & 3 | All open | All open | All open | All open | All open | |
IRQ10 | All open | All open | 2 & 3 | All open | All open | All open | |
IRQ11 | All open | All open | All open | 2 & 3 | All open | All open | |
IRQ12 | All open | All open | All open | All open | 2 & 3 | All open | |
IRQ15 | All open | All open | All open | All open | All open | 2 & 3 | |
SERIAL PORT CONFIGURATION | |||||
Port 1 | Port 2 | SW1/3 | SW1/4 | SW1/5 | |
| » | COM1 | COM2 | On | On | On |
COM2 | COM3 | On | On | Off | |
COM2 | COM3 | On | Off | On | |
COM3 | COM4 | On | Off | Off | |
COM3 | COM4 | Off | On | On | |
COM3 | COM4 | Off | On | Off | |
COM3 | COM4 | Off | Off | On | |
Disabled | Disabled | Off | Off | Off | |
PARALLEL PORT (P1) CONFIGURATION | |||
LPT | SW1/6 | SW1/7 | |
| » | LPT1 - 378h | Off | On |
LPT2 - 278h | On | On | |
MDA - 3BCh | On | Off | |
Disabled | Off | Off | |
MISCELLANEOUS TECHNICAL NOTES |
Jumpers JP11 and JP12 and JP14 are factory configured - do not alter. |
My Books
