GDT6111RP Hard Disk/Floppy Controller Settings and Configuration

Card Type	Hard drive controller card
Hard Drives supported	Up to 7 SCSI devices
Floppy drives supported	None
Cache size	4/8/16/32/64MB
Data Bus	32-bit PCI
Card Size	Full-length, full-height card

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector - external	CN1	Feature socket B	CN5
Feature connector B	CN2	LED connector	CN6
50-pin SCSI connector - internal	CN3	Feature socket A	CN7

USER CONFIGURABLE SETTINGS
Function		Label	Position
	EDO SIMM installed	JP1/D	Closed
	FPM SIMM installed	JP1/D	Open
»	Active termination enabled	JP2	Closed
	Active termination disabled	JP2	Open
»	Factory configured - do not alter	JP3	Pins 7 & 8, 9 & 10 closed
»	Factory configured - do not alter	JP4	Open

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	On	SCSI channel active
LED1	Yellow	Off	SCSI channel idle
LED2	Green	On	DMA OK
LED2	Green	Off	DMA not OK
LED3	Green	On	Status OK
LED3	Green	Off	Status not OK

CACHE CONFIGURATION
Size	BANK 0
4MB	1MB x 36
8MB	2MB x 36
16MB	4MB x 36
32MB	8MB x 36
64MB	16MB x 36