GDT6517RP Hard Disk/Floppy Controller Settings and Configuration

Card Type	Hard drive controller card
Hard Drives supported	Up to 7 SCSI devices
Floppy drives supported	None
Cache size	4/8/16/32/64MB
Data Bus	32-bit PCI
Card Size	Full-length, full-height card

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector channel A - external	CN1	Feature socket A	CN5
Feature connector B	CN2	Feature socket B	CN7
68-pin SCSI connector channel A - internal	CN3	LED connector	JP1/A
50-pin SCSI connector channel B - internal	CN4

USER CONFIGURABLE SETTINGS
Function		Label	Position
	EDO SIMM installed	JP1/E	Closed
	FPM SIMM installed	JP1/E	Open
»	Active termination channel A enabled	JP4	Closed
	Active termination channel A disabled	JP4	Open
»	Factory configured - do not alter	JP2	Reserved
»	Factory configured - do not alter	JP3	Reserved

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	On	SCSI channel A active
LED1	Yellow	Off	SCSI channel A idle
LED2	Green	On	DMA OK
LED2	Green	Off	DMA not OK
LED3	Green	On	Status OK
LED3	Green	Off	Status not OK

CACHE CONFIGURATION
Size	BANK 0
4MB	1MB x 36
8MB	2MB x 36
16MB	4MB x 36
32MB	8MB x 36
64MB	16MB x 36