GDT6537RP Hard Disk/Floppy Controller Settings and Configuration

Card Type	Hard drive controller card
Hard Drives supported	Up to 21 SCSI devices
Floppy drives supported	None
Data Bus	32-bit PCI
Card Size	Full-length, full-height card

CONNECTIONS
Function	Location	Function	Location
SCSI 68-pin connector channel A - external	CN1	Feature connector B	CN8
Feature connector A	CN2	Feature socket A	CN9
SCSI 68-pin connector channel A - internal	CN3	Feature socket B	CN10
SCSI 68-pin connector channel B - internal	CN5	SCSI 68-pin connector channel C - internal	CN12
SCSI 50-pin cable connector channel B - internal	CN6	SCSI 50-pin cable connector channel C - internal	CN13
LED connector	CN7

USER CONFIGURABLE SETTINGS
Function		Label	Position
	EDO SIMM installed	JP2/A	Closed
	Fast Page Mode SIMM installed	JP2/A	Open
»	Active termination channel A enabled	JP5	Closed
	Active termination channel A disabled	JP5	Open
»	Active termination channel B enabled	JP6	Closed
	Active termination channel B disabled	JP6	Open
»	Factory configured - do not alter	JP1	Reserved
»	Factory configured - do not alter	JP2	Reserved
»	Factory configured - do not alter	JP3	Reserved
»	Factory configured - do not alter	JP4	Reserved
»	Factory configured - do not alter	JP7	Reserved
»	Active termination channel C enabled	JP8	Closed
	Active termination channel C disabled	JP8	Open

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	On/Blinking	SCSI channel A active
LED1	Yellow	Off	SCSI channel A idle
LED2	Yellow	On/Blinking	SCSI channel B active
LED2	Yellow	Off	SCSI channel B idle
LED3	Yellow	On/Blinking	SCSI channel C active
LED3	Yellow	Off	SCSI channel C idle
LED4	Green	On	DMA OK
LED4	Green	Off	DMA not OK
LED5	Green	On	Status OK
LED5	Green	Off	Status not OK
LED6	Unidentified	On/Blinking	SCSI channel A or B active
LED6	Unidentified	Off	SCSI channel A or B idle

CACHE CONFIGURATION
Size	BANK 0
4MB	1MB x 36
8MB	2MB x 36
16MB	4MB x 36
32MB	8MB x 36
64MB	16MB x 36