POWERARRAY, POWERCACHE Hard Disk/Floppy Controller Settings and Configuration
ICL
POWERARRAY, POWERCACHE
POWERARRAY L, POWERCACHE L
INTELLIGENT SCSI HOST ARRAY/CACHE ADAPTERS
Data bus: | 32-bit EISA |
Size: | Full-length, full-height card |
Hard drive supported: | Up to seven SCSI-2 or Fast SCSI devices (POWERARRAY L, POWERCACHE L) Up to fourteen SCSI-2 or Fast SCSI devices (POWERARRAY, POWERCACHE, INTELLIGENT SCSI HOST ARRAY/CACHE) |
Floppy drives supported: | None |
CONNECTIONS | |
Function | Location |
50-pin SCSI connector - external | J1 |
50-pin SCSI primary connector - internal | J2 |
50-pin SCSI secondary connector - internal | J3 |
4-pin connector - drive active LED | J4 |
Note: Positions of primary and secondary internal connectors may be reversed on some models. | |
STATUS LED | ||
LED | Status | Function |
LED1/2 | green | board functioning |
LED1/2 | blinking red | board not functioning |
DRAM CONFIGURATION | ||
Size | Bank 0/1 | Bank 0/1 |
2 MB | (1) 256 x 36 | (1) 256 x 36 |
8 MB | (1) 1M x 36 | (1) 1M x 36 |
MISCELLANEOUS TECHNICAL NOTES |
POWERARRAY/POWERCACHE model differences center on BIOS functionality. J4 orientation my vary. |
My Books
