EV-365 Hard Disk/Floppy Controller Settings and Configuration
EVEREX SYSTEMS, INC.
EV-365
Data Bus: | 16-bit ISA |
Size: | Full-length, Full-height card |
Hard drives supported: | IDE (AT) drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
10-pin serial port (COM1/3) - internal | CN1 |
25-pin parallel port (LPT2/3) external | CN2 |
10-pin serial port (COM2/4) - internal | CN3 |
34-pin control cable connector - floppy drive | CN4 |
40-pin IDE (AT) Interface connector | CN5 |
15-pin game port - internal | CN6 |
2-pin connector - Drive active LED | JP1 |
Optional IOCHRDY for IDE interface | JP9 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Serial port 1 enabled | JP2 | Pins 1 & 2 closed |
Serial port 1 disabled | JP2 | Pins 2 & 3 closed | |
| » | Game port enabled | JP3 | Pins 1 & 2 closed |
Game port disabled | JP3 | Pins 2 & 3 closed | |
| » | Floppy drive enabled | JP4 | Pins 1 & 2 closed |
Floppy drive disabled | JP4 | Pins 2 & 3 closed | |
| » | Printer port is set to LPT2 | JP5 | Pins 1 & 2 closed |
Printer port is set to LPT3 | JP5 | Pins 2 & 3 closed | |
| » | IDE interface enabled | JP6 | Pins 1 & 2 closed |
IDE interface disabled | JP6 | Pins 2 & 3 closed | |
| » | Serial port 2 enabled | JP7 | Pins 1 & 2 closed |
Serial port 2 disabled | JP7 | Pins 2 & 3 closed | |
| » | Primary Hard Disk Controller enabled | JP8 | Pins 1 & 2 closed |
Primary Hard Disk Controller disabled | JP8 | Pins 2 & 3 closed | |
My Books
