DTC3290ASE Hard Disk/Floppy Controller Settings and Configuration
DATA TECHNOLOGY CORPORATION
DTC3290ASE
Maximum Onboard Memory | Unidentified |
Data Bus | EISA |
Card Size | Full height, three-quarters length |
Hard Drives Supported | Up to 7 SCSI-2 devices |
Floppy Drives Supported | Unidentified |
CONNECTIONS | |||
Function | Label | Function | Label |
34-pin cable connector - floppy drive | J1 | 50-pin SCSI connector - internal | J3 |
50-pin SCSI connector - external | J2 | 4-pin drive active LED | LED |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Factory configured - do not alter | RP1 | Unidentified |
| » | Factory configured - do not alter | RP2 | Unidentified |
| » | Factory configured - do not alter | RP3 | Unidentified |
| » | Factory configured - do not alter | RP4 | Unidentified |
| » | Factory configured - do not alter | RP5 | Unidentified |
| » | Factory configured - do not alter | RP6 | Unidentified |
| » | Factory configured - do not alter | RP7 | Unidentified |
| » | Factory configured - do not alter | RP8 | Unidentified |
| » | Factory configured - do not alter | RP9 | Unidentified |
| » | Factory configured - do not alter | RP10 | Unidentified |
| » | Factory configured - do not alter | RP11 | Unidentified |
DRAM CONFIGURATION |
The configuration of the DRAM on this board is unidentified. |
SCSI TERMINATION |
The method for selecting SCSI termination is unidentified. |
My Books
