ATI-IDEAL PCI-CACHE Hard Disk/Floppy Controller Settings and Configuration

Data bus:	32-bit PCI
Size:	Half-length, full-height card
Hard drive supported:	Four IDE(AT) drives
Floppy drives supported:	None

CONNECTIONS
Function	Location
40-pin primary IDE(AT) connector	CN1
40-pin secondary IDE(AT) connector	CN2
4-pin connector - drive active LED	CN3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Factory configured - do not alter	JP2/4	open
»	IDE primary address is 1F0h	JP2/5	closed
	IDE secondary address is 170h	JP2/5	open
»	Factory configured - do not alter	JP2/6	closed

PCI INTERRUPT SELECTION
INT		JP1/1	JP1/2	JP1/3	JP1/4
»	A	closed	open	open	open
	B	open	closed	open	open
	C	open	open	closed	open
	D	open	open	open	closed

BIOS ADDRESS SELECTION
Address		JP2/1	JP2/2	JP2/3
»	DC000-DFFFFh	closed	closed	closed
	C8000-CBFFFh	closed	open	open
	CC000-CFFFFh	open	closed	open
	D0000-D3FFFh	closed	closed	open
	D4000-D7FFFh	open	open	closed
	D8000-DBFFFh	closed	open	closed
	Disabled	open	open	open

DRAM CONFIGURATION
Size	Bank 0	Bank 1
512KB	(2) 256 x 9	none
1MB	(2) 256 x 9	(2) 256 x 9
2MB	(2) 1MB x 9	none
2.5MB	(2) 256 x 9	(2) 1MB x 9
4MB	(2) 1MB x 9	(2) 1MB x 9
8MB	(2) 4MB x 9	none
8.5MB	(2) 4MB x 9	(2) 256 x 9
10MB	(2) 4MB x 9	(2) 1MB x 9
16MB	(2) 4MB x 9	(2) 4MB x 9
Note: Bank 1 & Bank 0 are interchangeable.